Chimera Engineering Rear Lowering Link - 4.5" - Kawasaki Z125 PRO (ALL YEARS)

Lowering your Kawasaki Z125 Pro is a straightforward process with the Chimera Engineering bolt-on rear lowering link. Designed for a quick, hassle-free installation, this kit requires absolutely no drilling. You can install it on the ground by simply supporting the bike with a floor jack to remove the rear shock.

Please note that this kit may requires a slip-in stretch on the stock swingarm for proper fitment. Depending on the size of the rear tire, it may run against the lowering link without the stretch kit. 

Available in Raw or Hard Anodized Black

FITMENT:

2016-2026 Kawasaki Z125 PRO

INSTALLATION NOTES: 

• A stiffer shock may be needed due to the increased angle.
• Rear Lowering Link will require minor trimming of the rear hugger/fender for clearance. Some shocks with larger bodies/reservoirs mounted on them may require additional trimming.
• A stretch kit MIGHT be needed to use the lowering link! Depending on the size of the tire (usually larger size than OEM), it may rub or make contact with the lowering link if you do not have a stretch kit. You might be able to run the chain adjuster further back if you have enough chain slack. 
• If you keep the kick stand in the stock location, it will need to be shortened!