JHR Dragger 1pc 12x4 Front Rim 2+2, 4x90mm
JHR Dragger 1pc 12x4 Front Rim 2+2, 4x90mm
JHR Dragger 1pc 12x4 Front Rim 2+2, 4x90mm
JHR Dragger 1pc 12x4 Front Rim 2+2, 4x90mm
Sold Out
  • SKU: JHR-1010

JHR Dragger 1pc 12x4 Front Rim 2+2, 4x90mm

$349.99
Shipping calculated at checkout.
    DESCRIPTION

    JHR Dragger 12x4 Front Rim. 2+2 offset, 4x90mm bolt pattern is perfect for Honda Ruckus, Grom 125, and Monkey 125! These will also work for other minimoto's such as Zuma 125, Zuma 50, CT70, and other motorcycles with the correct hubs! Machined from Douglas Wheel Technologies (DWT) solid dish blanks, with chamfer efforts on both sides of the rim.

    NOTES:

    1. Does not include hub. You would need to purchase the appropriate hubs depending on your application.
    2. Please be aware that the chamfer process is carried out to the best of JHR's ability, but due to the DWT blanks not being perfectly flat at the center and exhibiting a bulge where the halves are joined, variations in the depth and visibility of the chamfer may occur. One side might have more chamfer than the other and some area might not have any chamfer due to the thickness variations from the spun process.

    Specs:

    • Design: Dragger
    • Diameter: 12"
    • Width: 4"
    • PCD Bolt Pattern: 4x90 (4x91mm actual)
    • Finish: Raw aluminum with minor color blend polish (not mirror or show quality polish)

     

    SPUN ALUMINUM RIM NOTE:

    Douglas Wheel Technologies (DWT) rims are made from spun aluminum, which is originally designed to be used with off-road vehicles, such as ATV and UTV. All Douglas rims have a slight wobble or run-out since they are designed for off-road vehicles that are used on the sands. It's industry standard for spun rims to have some run-outs or up and down movement.

     

    ⚠ WARNING: California Proposition 65 www.P65Warnings.ca.gov.

    RECENTLY VIEWED PRODUCTS

    BACK TO TOP