Chimera Engineering Wheels 12" Rim Barrels with Perimeter Holes

 Chimera Engineering Wheels allows you to custom build true 3pc modular wheels to suit and fit your bike or set up! Choose from 1", 2", 3", and 4" widths! This would allow you to build 2" to 8" wide wheels. Polished finish!

SOLD EACH! 1 RIM BARREL! 

To build a wheel, you would need 2 rims. Different engine or bike would require different rim offsets.

Please see below for an example.

• A 12x2 Rim would require 2pc. of 12x1 Barrels
• A 12x4 Rim would require 2pc. of 12x2 Barrels

These are just an example, please double check to see what offset and size you need before ordering!

RIM CENTER/FACE AND HARDWARES ARE SOLD SEPARATELY. THESE ARE JUST THE RIM BARRELS PER SIDE.

Chimera Engineering Wheels precisely spun from T-6061 aluminum material! Chimera machined the edge of the lip to give you additional clearance to the drive chain or fender.

Specs:

• Diameter: 12"
  
• Inside Diameter: 9.055" (230mm)
• Perimeter Bolt Holes = 20
• Perimeter Bolt Holes Diameter: 6.3mm
• Perimeter Hole Diameter: 242mm
  
• Thickness: 4mm
• Polished Finish

Options:

• Width Available: 1", 2", 3", 4" (choose from drop-down menu)
• Rim Type: Inner (Flat) or Outer (Stepped)
• With or Without Valve Stem Hole

Rim center/face could be mounted however you prefer or suits your offset/alignment:

• RFR: (Rim-Face-Rim) Sandwich = Face is between the barrels 
• FRR: (Face-Rim-Rim) Behind = Face is behind both barrels
• RRF: (Rim-Rim-Face) Front = Face is in front of both barrels