SMR FACTORY Upgraded clutch springs set for Honda Grom Monkey 125 that is 60% stiffer! Pair these up with SMR FACTORY 6 Disc performance clutch kit and you'll have the...
SMR Factory 6 Disc clutch upgrade set for Honda Grom Monkey 125! Pair these up with SMR Factory Stiffer Upgraded Clutch Springs and you'll have the best upgraded wet clutch...
SMR FACTORY 6 Disc clutch upgrade set for Honda Grom Monkey 125 (2022+) 5 Speed Engines! Pair these up with SMR FACTORY Stiffer Upgraded Clutch Springs and you'll have the...
Keep your engine, throttle body, turbo inlet, or carburetor protected with the Chimera Engineering Filter Wrap for CH-1307 or K&N RC-1060 universal air filters! Made from 100% monofilament polyester with...
Chimera Engineering T-56 headlight harness for the 2022+ Honda Grom using the Baja Design Squadron LED light. This plug-and-play harness features both hi/low settings (reduced output and full output), which can...
Chimera Short Aluminum Banjo Bolt with - M10 x 1.00mm. Commonly used with Brembo and Adelin Calipers. 10mm x 1.00mm 7075 aluminum banjo bolt with 2 copper crush washers. These...
Get a more complete and sportier look by adding a Genuine OEM Honda Under Cowl / Belly Pan to the Honda Grom 125! This Under Cowl usually comes with the...
12mm x 1.5 Neodymium Magnetic drain bolt with washer. Magnetic Oil Drain Plug will attract small metal particle and remove them from the oil. It will help to keep the oil...
Achieve a significant reduction in the engine temperature of the 2022+ 5 Speed Grom/Monkey engine by using the Chimera Engineering oil cooler block. This block can be used alone or...
Chimera Engineering offers engine swap kits for 250/300cc engines, which allow you to install either a Honda NC51 (300cc) or a Honda MC41 (250cc) engine onto your 2022+ Honda Grom....
Chimera Sports Rear Shock coil over shock for Honda Grom 125 (ALL YEARS) by Gears Racing! Gears Racing EV shocks are engineered for high performance and competition while maintaining street...
Chimera Short Aluminum Banjo Bolt with - M10 x 1.25mm 10mm x 1.25mm 7075 aluminum banjo bolt with 2 copper crush washers. These are drilled for safety wire. Overall Length:...
Solid dish blank rims are simple, clean, and classic! It will match any style builds! Perfect for those that don't want any designs or cuts on the rims! Please see...
Keep your engine, throttle body, turbo inlet, or carburetor protected with the Chimera Engineering Filter Wrap for Sprint Filter Water Proof cone universal air filters SKU: BP-1002 / 401934! Made...
Chimera Rear Brake Pedal Return Spring kit! This would allow you to simplify your rear set set up by eliminating that long OEM return spring that hooks onto the foot...
Get ready to upgrade your swapped Grom or Monkey with the Chimera Engineering Podium Front Sprocket Cover! Specifically designed for Honda Groms with a CB300, CBR250/300, CRF250L, or Rebel 300...
Nemoto Captive Chain Adjuster integrated paddock stand spools for ALL YEARS Honda Grom 125 and DAX 125! Great and simple design, you could use it on either side (LEFT OR...
We all love to ride and shred the stunt lot, what's more fun than that? Customizing and personalizing your Honda Grom, Monkey, Dax, or Trail 125! Add a Chimera Engineering...
The ProTaper SE bar is Pro Taper’s seven-eighths inch diameter handlebar designed for riders who still prefer the look, feel, and stability of a bar with a cross brace. Constructed...
Chimera Engineering 5 Bolt Rotor Front Hub, designed specifically for aftermarket and custom rims! This hub provides a seamless solution for effortlessly mounting hub-less rims onto your Honda Grom 125...
Chimera Engineering 12mm Axle Puller Slider Cups! Protect your forks or rear swing arm around axles area when the misfortunate happens. These will work for either front or rear wheel...
TST SPOOLED CAPTIVE CHAIN ADJUSTERS FOR HONDA GROM 2022+ Perform chain adjustments and rear maintenance without the hassle of the chain adjusters constantly falling out of place. TST Captive Chain...
GENUINE OEM 2017-2020 Honda Grom 125 SF Key Ignition Switch Assembly. These are factory Honda replacement ignition switch that will replace damaged units or lost keys. This set does not...
MUST SELECT FROM THE PRODUCT OPTIONS TO COMPLETE THE KIT PRODUCT OPTIONS EXPLAINED: Select the Chimera Hood Shroud Color (+$50) The Baja Designs Squadron LED light has three options. SPORT...
The Chimera Engineering Billet "TRUST" Sprocket Cover is a perfect fit for Honda GROM (2014-2020) and Monkey 125 (2019-2020). It also fits all 4 speed GROM based engines on the...
Baja Designs replacement/change out lens kit for the Squadron series pod lights! Universal fit for all Baja Designs Squadron series light! Sold individually (1 kit for 1 Squadron light) LENS...
ARacer DG2 (DG-2) Multi-Function Display Gauge! Add this display gauge to your aRacer ECU + AF2 Module so that you could monitor your AFR setting at all times!聽 You could...
