JHR HAVEN 1pc 12x4 Front Rim 2+2, 4x90mm

JHR HAVEN 12x4 Front Rim. 2+2 offset, 4x90mm bolt pattern is perfect for Honda Ruckus, Grom 125, and Monkey 125! These will also work for other minimotos such as Zuma 125, Zuma 50, CT70, and other motorcycles with the correct hubs! Machined from Douglas Wheel Technologies (DWT) solid dish blanks, with a chamfer on both sides of the rims, which will give you the same look on both sides of the rim!

NOTES:

1. Does not include hub. You would need to purchase the appropriate hubs depending on your application.
2. Please be aware that the chamfer process is carried out to the best of JHR's ability, but due to the DWT blanks not being perfectly flat at the center and exhibiting a bulge where the halves are joined, variations in the depth and visibility of the chamfer may occur. One side might have more chamfer than the other, and some area might not have any chamfer due to the thickness variations from the spun process.

Specs:

• Design: HAVEN
• Diameter: 12"
• Width: 4"
• PCD Bolt Pattern: 4x90 (4x91mm actual)
• Finish: Raw aluminum with minor color blend polish (not mirror or show quality polish)

SPUN ALUMINUM RIM NOTE:

Douglas Wheel Technologies (DWT) rims are made from spun aluminum and were originally designed for use on off-road vehicles, such as ATVs and UTVs. All Douglas rims have a slight wobble or run-out because they are designed for off-road vehicles used on sand. It's an industry standard for spun rims to have some run-outs or up-and-down movement. The lip edge may contain some slight blemishes or imperfections, as DWT does not package the rims with enough protection during shipping; therefore, it's DWT's standard to have some blems/imperfections on the lip edge. DWT made their wheels with the intention that they would be used hard in the dirt and sand. If you want high-quality rims, please look into Chimera Engineering Wheels (CHW).