No Products in the Cart
TB Performance Camshaft for Kawasaki KLX110 2003-2009
This is a replacement camshaft for our regular Race Head or an upgrade to the stock head camshaft. This is the YX type cam that has more lift/duration than most stock head type cams and is a GREAT upgrade for low cost. No installation instructions supplied as this is installed same as OEM. - Will Fit Stock KLX110 & DRZ110 Heads but use caution and check for proper valve clearance
This Product is for use with TB 143cc piston (TBW0377 )This Piston has proper valve relief.
Use caution and make sure you have proper valve clearance if installing with any other pistons.
Furthermore, the cam is a very tight fit and requires patience and mechanical skills to install. Recommend running your stock far end bearing on the new cam
*Does not fit Race Head V2
NOTES:
Carb Rejet will be required. Professional installation is highly recommended!
Disclaimer: NO WARRANTY ON RACE ENGINE parts or engine bore up kits. There is no warranty stated or implied due to the unusual stresses placed on these parts and because we have no control over how they are installed and used. Steady Garage will not be held liable for any failure or damage caused directly or indirectly from the use of these products or engine. The installation and use of these products or engine shall be conclusive evidence that the user assumes full responsibility for any damage caused directly or indirectly by their use.
