Aluminum RG Rear Sprocket for Kymco Spade 150cc.
  • SKU: RG-1002-31

Aluminum RG Rear Sprocket for Kymco Spade 150cc.

$40.00
Shipping calculated at checkout.
DESCRIPTION

Aluminum RG Rear Sprocket for Kymco Spade 150cc.


Aluminum RG Rear sprocket for Kymco Spade 150cc. These gears are manufactured from aircraft quality 7075 T651 Plate Aluminum. Harder than steel and far lighter to save on unsprung weight.

Available in

  • -31T
  • -32T
  • -33T
  • -34T
  • -35T

The stock rear sprocket size on the Kymco Spade 150 is 33 tooth. You can go up to 34t or 35t to increase your acceleration at the expense of top end speed. If you go down to the 31t or 32t you can get a higher top end speed at the expense of acceleration. A few rules of thumb with gear ratios for sprockets are as follows:

  • Drop teeth on front/add teeth to rear = increased torque, increased acceleration, wheelies, racetracks with short straights
  • Add tooth on front/reduce teeth on rear = increased top end speed, open road cruising, lowers RPMs, better gas mileage, tracks with long straights
  • 1 down on the front is like adding 3 teeth on the rear
  • The bigger the rear sprocket, the lower the gearing and the faster the acceleration
⚠ WARNING: California Proposition 65 Warning www.P65Warnings.ca.gov.

RECENTLY VIEWED PRODUCTS

BACK TO TOP