JHR HAVEN 1pc 12x6 Rear Rim 4+2, 4x110mm

JHR HAVEN 12x6 Rear Rim. 4+2 offset, 4x110mm bolt pattern is perfect for Honda Grom 125, Monkey 125, and other custom scooters/Mini Motos! Machined from Douglas Wheel Technologies (DWT) solid dish blanks, with chamfer on both sides of the rims, which will give you a nice look on both sides!

NOTES:

1. Does not include hub. You would need to purchase the appropriate hubs depending on your application.
2. Please be aware that the chamfer process is carried out to the best of JHR's ability. Still, because the DWT blanks are not perfectly flat at the center and exhibit a bulge where the halves join, variations in the depth and visibility of the chamfer may occur. One side might have more chamfer than the other, and some areas might not have any chamfer due to thickness variations from the spinning process.

Specs:

• Design: HAVEN
• Diameter: 12"
• Width: 6"
• PCD Bolt Pattern: 4x110mm
• Finish: Raw aluminum with minor color blend polish from DWT (not mirror or show quality polish)

SPUN ALUMINUM RIM NOTE:

Douglas Wheel Technologies (DWT) rims are made from spun aluminum and were originally designed for use on road vehicles, such as UTVs. Douglas rims have a slight wobble or run-out because they are designed for off-road vehicles used on sand. It's industry standard for spun rims to have some run-out or up-and-down movement. The lip edge may contain slight blemishes or imperfections because DWT does not package the rims with enough protection during shipping; therefore, it's DWT standard to have some blemishes/imperfections on the lip edge. DWT made their wheels with the intention that they would be used hard in the dirt and sand. If you want high-quality rims, please look into Chimera Engineering Wheels (CHW).