Chimera Engineering Billet Rear Cush Hub Carrier- Honda Grom Monkey Super Cub

Chimera Engineering full billet aluminum rear cush hub carrier for Honda Grom 125, Honda Monkey 125, and Honda Super Cub 125! Great upgrade for those who is looking for a stronger, nicer, and better cush drive hub that would match their billet hubs or for those who wants their hubs to handle more power!

The original rear cush hub from Honda is made from cast aluminum. It's not the best-looking part and it's hard to polish and coat due to the type of material and the design. The Chimera Engineering Billet Rear Cush hub was designed to solve that! It's a much smoother design and it's much stronger as it's machined from T-6061 aluminum! Polish, anodize, plate, or coat them to match perfectly with your rear hub or aftermarket wheel!

Available in 8mm or 10mm Bolt Sprocket Size.

 

Content:

• Chimera Engineering Billet Rear Cush Drive Hub Carrier
• Nachi Bearing (Made in Japan)

Made in the USA!

 

Fitment:

• Honda Grom 125 ABS or NON-ABS (2014-2020) (4 Speed) = 8mm Sprocket Bolt
• Honda Grom 125 ABS or NON-ABS (5 Speed) (2022+) = 10mm Sprocket Bolt
• Honda Monkey 125 ABS or NON-ABS (2019-2022) (4 Speed) = 8mm Bolt
• Honda Monkey 125 ABS or NON-ABS (2022+) (5 Speed) = 10mm Bolt
• Honda Super Cub 125 ABS or NON-ABS (4 Speed)  = 8mm
• Any rear hub that is designed to run the OEM hub carrier for the listed bikes above.

Note:

It does not include the rear cush hub carrier sleeve/spacer that goes between the rim and the carrier. The sleeve/spacer is REQUIRED, if you don't have the sleeve, it will cause damage to the bearings and/or hub. You could reuse your existing one or purchase a new one (SKU: HND-1119).

 

⚠ WARNING: California Proposition 65 www.P65Warnings.ca.gov.