The wheel dampers AKA cush drive rubbers inside the sprocket carrier play a crucial role in your drivetrain—they help absorb shock and reduce stress during acceleration, deceleration, and gear shifts....
Chimera Engineering 8mm 7075 Aluminum Closed-End (Acorn) Head Stud Nuts! Replaces the engine's ugly head stud nuts and at the same time, helps pull heat from the head studs as...
Chimera M24 Ruckus Front Fork Adapter for Honda Grom 125! This adapter kit will allow you to convert and run any Ruckus front forks, from RRGS, NCY, Feign, etc. To...
Plug and Play Headlight Converter H4 to Honda Grom SF Headlight. This headlight converter harness will allow you to change H4 bulb to run a 2017-2020 Honda Grom "SF" headlight....
TalentCell Rechargeable 6000mAh DC 12V/5V USB Battery Pack Features Please turn on the battery switch to position "I" when you're charging. The LED indicator of the AC/DC charger will...
The Chimera Engineering Billet "TRUST" Sprocket Cover is a perfect fit for Honda GROM (2014-2020) and Monkey 125 (2019-2020). It also fits all 4 speed GROM based engines on the...
Chimera X Factor Foot Rest V2 that has been redesigned to work with OEM floorboards for 2002+ Honda Ruckus and 2002-2012 Honda Metropolitan (CHF50)! This is the best option for...
Chimera OSC throttle cable will allow slide carburetors to be installed with stock throttle control kit. The OSC cable will also work with any aftermarket throttle tube/cam that accepts a...
The next generation of the "Ruck Rack" has arrived—now proudly manufactured by Chimera Engineering! Completely redesigned with a modular construction, rigid mounting system, and a more utilitarian design, this upgraded...
Looking for a secure and efficient way to mount a Baja Designs S1 light onto your Super73 E-Bike? Look no further than the Chimera Engineering Baja Designs S1 Light Bracket!...
Chimera FEIGN/NCY/RRGS ‘LOW DOWN’ FRONT FORK LOWERING KIT - Honda Ruckus Metropolitan Want to get more low out of your FEIGN/NCY/RRGS 'Low Down' front forks? With the low profile tires...
For those who aren't about that kickstart life, you can easily eliminate the kick start lever on your Zongshen ZS190 Daytona 190cc engine and cover up the kick start shaft...
Chimera Engineering Universal Handlebar Bar Clamp 7/8" diameter handlebar. Will mount into any location with 12mm hole. Available in: Black Blue Gray Red Chimera Engineering Universal Handlebar Bar Clamp 7/8"...
Chimera Engineering Aluminum Wheel Spacer Set - Honda Monkey 125Sold in Set of 4.Chimera Engineering aluminum wheel spacer set for Honda Monkey 125 Completely replace the heavy steel OEM front...
Chimera front brake caliper bracket for Honda Ruckus RRGS Feign NCY Forks. Will accept Brembo P32/P34 calipers with 220mm front rotor. Perfect for the lowering of the Honda Grom 125....
Release Notes - 2nd Generation SlimLite® 6” (SL6 v2); Effective July 2025 Now featuring a 100% full power mode (High beam) and a 20% dimmed mode (Low Beam) for on-road...
The Honda Motocompacto already looks cool, but if you want to make it truly stand out, the Chimera Exo MOLLE Panels are the perfect upgrade! Not only do they add...
Chimera Engineering Small Engine Plug (timing inspection plug) for the stator cover. Manufactured using 6AL-4V Grade 5 Titanium. These replaces the dull looking factory plastic or cast aluminum cover. Pre-drilled...
Looking for the ultimate headlight setup for your 2022+ Honda Grom? The Chimera Groundead headlight kit paired with the Baja LP9 LED light is the brightest and most powerful option...
The OG/SF 4 Speed engine has numerous high-performance modifications, making it capable of reaching its full potential. In contrast, the 5 speed engine is limited by its narrow head stud...
NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES Chimera Engineering Cold Air intake system for (2021-2023) KTM Duke 390! Direct bolt-on intake system that...
Transform the Honda Motocomapcto with this complete kit that includes everything you need to mount and run a fatty rear wheel! Not only does it give your Motocompacto a new custom...
Chimera Engineering Large Engine Plug (inspection plug) for the stator cover. Manufactured using 6AL-4V Grade 5 Titanium. These replaces the dull looking factory plastic or cast aluminum cover. Pre-drilled holes...
Chimera Engineering 10mm Aluminum Banjo Fitting with 6mm Barb. These were engineered to move fluid with a large 5.6mm hole, perfect for oil coolers, oil transfers, and more! For M6 (5mm -...
Simple and small size, these Chimera Mini Billet Aluminum Foot Peg are perfect for anything! From foot pegs for aftermarket rear sets to bicycle, e-bikes to Motocompacto's, overland rigs to...
Chimera Billet Bump Start Cover Honda CRF110FMade in the USA!Available in the following anodize color: Black Blue Gunmetal Grey Red Yellow Chimera Billet Bump Start Cover Honda CRF110FReplaces the stock...
