RacingBros Front Fork Lowering Kit Honda Grom Monkey 125
RacingBros Front Fork Lowering Kit Honda Grom Monkey 125
RacingBros Front Fork Lowering Kit Honda Grom Monkey 125
RacingBros Front Fork Lowering Kit Honda Grom Monkey 125
RacingBros Front Fork Lowering Kit Honda Grom Monkey 125
RacingBros Front Fork Lowering Kit Honda Grom Monkey 125
RacingBros Front Fork Lowering Kit Honda Grom Monkey 125
RacingBros Front Fork Lowering Kit Honda Grom Monkey 125
RacingBros Front Fork Lowering Kit Honda Grom Monkey 125
  • SKU: RBROS-1037-6.5NMM

RacingBros Front Fork Lowering Kit Honda Grom Monkey 125

$420.00
Shipping calculated at checkout.
    DESCRIPTION

    RacingBros Front Fork Lowering Kit for Honda Grom / Monkey 125! These kits will fit all years Honda Grom 125 and Honda Monkey 125! The RacingBros Front Fork Lowering Kit reduces the front fork height from 3"- 4"+! This will still allow you to obtain a good suspension travel without the risk of bottoming out. Running RacingBros Front Fork Lowering Kit is the proper way to lower the front suspension of your Grom or Monkey without giving up suspension travel. The fork bodies and shafts are shorter by approximately 2-5/8".

    RacingBros Front Fork Lowering Kit would accept the following front fork internals (not included, sold separately):

    Racing Bros Front Fork Lowering Kit Manual

    Steady Garage collaborated with RacingBros to specially design these Front Fork Lowering Kits for the Honda Grom 125 and Honda Monkey 125! Stance culture is popular in America, however, the days of converting to Ruckus front forks are no longer needed to achieve a lowered ride height. Running the RacingBros Front Fork Lowering Kits also means keep the strength from the original diameter size of the fork shaft, which is much large than the Ruckus forks. The Front Fork Lowering Kit is also much better than the Composimo 2" Drop-In Kits as it would have more suspension travel and also it doesn't require switching over to RaceBarz or the Chimera FC Handlebar plate.

    SPECS:

    • 4" Lowering = 22.2" TLG. Fork Travel = 3"
    • 3" Lowering = 23.2" TLG. Fork Travel = 4"

    Stock Fork Information: 26.2" TLG, Fork Travel = 4".

    NOTE: TLG is measured from the top-end of the outer (Aluminum) tube to the center of the axle hole.

    Content:

    • RacingBros Lowering Steel Fork Shaft (x2)
    • RacingBros Lowering Aluminum Fork Tube (x2) - Anodized Black
    • 33.7mm OD Travel Spacers (x4)
    • 24.5mm OD POM Spacers (x2)
    • Racing Bros Lowering Springs (x2) See drop-down menu for spring rate options.
    • Racing Bros Wiper (x2) and seal (x2)

    Available Spring Rates:

    • 6.5N/mm fork spring: Rides up to 265lbs
    • 7.5N/mm fork spring: Riders above 280lbs

    Benefits of the RacingBros Fork Lowering Kit compared to Ruckus Front Fork Conversions:

    • It allows you to run the OEM Grom Front Fender.
    • Retain suspension travel.
    • Allows you to choose the front fork internal of your choice (RacingBros, Ohlins, or Stock OEM)
    • Retain the original fork shaft diameter and also fork tube size to keep it the same strength.
    • Ability to adjust different ride height and also allows you to limit the suspension travel.

    Benefits of RacingBros Fork Lowering Kit compared to 2" Drop-In Lowering Kits:

    • Retain suspension travel.
    • It does not protrude above the top triple clamp, so you're not required to run the RaceBarz or Chimera FC Handlebar plate for clip-ons.
    • Ability to adjust different ride height and also allows you to limit the suspension travel.
    • Allows you to choose the front fork internal of your choice (RacingBros, Ohlins, or Stock OEM)
    • Looks 100x better since the fork tube (body) is shorter!

    Installation notes:

    Some OEM parts are needed to be reused from the OEM forks, such as the fork shaft guides, bottom fork brackets, and whatever else that isn't included with the kit content. 140-160ml of fork oil is needed per fork.

    Please use the Racing Bros adjustable front fork installation instructions as a guide or reference along with the Racing Bros Lowering Kit Instructions

    Professional installation is highly recommended! Steady Garage offers the front suspension installation service to the customer's front forks. Customers will have to provide a set of Grom forks in order for the Front Lowering Kit to be installed. We can also install the provided set of front fork damper kits at the same time as this service. Turn around time is 1-2 weeks, please contact us for scheduling and more information. Shipping must be covered by the customer, both ways.

    Based on all the ones that we have put together, if you plan on running OEM headlight and front fender, then the 3" front lowering is recommended for good travel length and also headlight to fender clearance. 4" lowering are only for those who are running aftermarket headlights such as Monster Eye or Composimo Triple X. You're welcome to set it up however you like, but you would need to take the time to measure and test.

    INSTALLATION TIP: 

    To prevent damage to the seal while installing them, we recommend putting a layer of masking tape around the threaded section of the fork shaft. The threaded section is sharp, which could damage the seal when you slide it past the threads.

    ⚠ WARNING: California Proposition 65 www.P65Warnings.ca.gov.

    RECENTLY VIEWED PRODUCTS

    BACK TO TOP