Chimera 7/8" Billet "CA" Handlebar Top Clamp - for (ALL YEARS) Honda Grom 125, Monkey 125, and Trail 125! Eliminate the boring factory OEM handlebar clamp with Chimera's billet unit! This handlebar clamp also bridges the two individual risers to make it more solid and stable, reducing the twists and flex people usually encounter during extreme riding.
- Black
- Blue
- Green
- Red
- Yellow
Direct replacement upgrade for the OEM riser base!
FITMENT:
- 2014 - 2015 Honda Grom 125
- 2017 - 2020 Honda Grom 125 (ABS/NON-ABS)
- 2022 - 2026+ Honda Grom 125 (ABS/NON-ABS)
- 2018 - 2021+ Honda Monkey 125 (ABS/NON-ABS)
- 2022 - 2026+ Honda Monkey 125 (ABS/NON-ABS)
- 2025 - 2026+ Honda Dax 125 (ABS/NON-ABS)
- 2021+ Honda Trail 125
Proudly made in the U.S.A!
Installation tips: Reusing the factory bolts are required.
With the OEM rubber bushings, you would need to reset the bottom risers so that it would move into the proper placement that would allow the top clamp to bolt on- it's super simple.
1) Loosen the two riser mount nuts under the top steering plate.
2) Mount the Chimera top clamp and screw it down till it bottoms out, you don't need to tighten it completely, but it should seat into position.
3) Tighten the two riser mount nuts to about 20 - 22 ft./lbs.
4) Loosen up the top clamp bolts, apply a small dab of blue thread lock (Loctite) to the bolt threads, adjust the handlebars to the position you want, and then tighten all the top clamp bolts down to about 16 -20 ft./lbs.
5) Double check to make sure everything is tight.
