JHR JC MESH 12x6/12x4 Rim Set - NON-ABS Honda Grom (2014-2020), Monkey (2018-2021)
  • SKU: JHR-JC-NABS-12x6/4

JHR JC MESH 12x6/12x4 Rim Set - NON-ABS Honda Grom (2014-2020), Monkey (2018-2021)

$709.99 $724.98
Shipping calculated at checkout.
    DESCRIPTION

    JHR JC MESH rim and pre-selected Chimera hub package for Honda Grom (2014-2020) and Monkey (2018-2021)!

    12x6 rear rim and 12x4 front rim package! Rear rim has a 4+2 offset, 4x110mm bolt pattern is perfect for Honda Grom 125, Monkey 125, and other custom scooters/Mini Motos! Machined from Douglas Wheel Technologies (DWT) solid dish blanks with chamfer efforts on the rims.

    NOTES:

    1. For 6" wide rear rim, the wheels will be offset to the right by 1". It does not affect riding alignment or handling. This applies for all billet hub set up running 6" wide rims. 
    2. Please be aware that the chamfer process is carried out to the best of JHR's ability, but due to the DWT blanks not being perfectly flat at the center and exhibiting a bulge where the halves are joined, variations in the depth and visibility of the chamfer may occur. One side might have more chamfer than the other and some area might not have any chamfer due to the thickness variations from the spun process.

    CONTENTS:

    • 1x: JHR JC Mesh Front Rim
    • 1x: JHR JC Mesh Rear Rim

    PRE-SELECT PRODUCT OPTIONS (Check boxes must be selected, otherwise the hubs will NOT be included): 

    • 1x: Chimera Rear Hub 
    • 1x Chimera Front Hub (NON-ABS, 4 rotor bolt holes)

    Rear Rim Specs:

    • Design: JC MESH
    • Diameter: 12"
    • Width: 6"
    • PCD Bolt Pattern: 4x110mm
    • Finish: Raw aluminum with minor color blend polish from DWT (not mirror or show quality polish)

    Front Rim Specs:

    • Design: JC MESH
    • Diameter: 12"
    • Width: 4"
    • PCD Bolt Pattern: 4x91mm (4x90mm)
    • Finish: Raw aluminum with minor color blend polish from DWT (not mirror or show quality polish)

    SPUN ALUMINUM RIM NOTE:

    Douglas Wheel Technologies (DWT) rims are made from spun aluminum, which is originally designed to be used with off-road vehicles, such as ATV and UTV. All Douglas rims have a slight wobble or run-out since they are designed for off-road vehicles that are used on the sands. It's industry standard for spun rims to have some run-outs or up and down movement. The llip edge may contain some slight blems or imperfections as DWT does not package the rims with enough protection during shipping, therefore it's DWT standard to have some blems/imperfections on the lip edge. DWT made their wheels with the intention of them being used hard in the dirt and sand. If you want high quality rims, please look into Chimera Engineering Wheels (CHW).

    ⚠ WARNING: California Proposition 65 www.P65Warnings.ca.gov.

    RECENTLY VIEWED PRODUCTS

    BACK TO TOP