Feign SB Honda Ruckus Front Disc Brake Combo

Feign SB Honda Ruckus Front Disc Brake Combo

SKU #: F3-1010
Feign builder front disc brake kit combo. Builder disc brake kit combo includes the following; Feign SB lowering forks, Feign 4-piston PH80 brake caliper, Feign 220mm floating brake rotor, Feign T7075 12mm aluminum Ruckus axle, and brake pads. Builder front disc brake kit combo allows you to run rims or hubs of your choice on your Honda Ruckus. Improve handling and brake performance as well as ride comfort. Available in full black or full silver.
Feign Black Builder Honda Ruckus Disc Brake Kit

Ruckus SB Combo - Black

Feign Black Builder Honda Ruckus Disc Brake Kit

Ruckus SB Combo - Silver

$0.00 In stock


Availability: In stock

Feign Honda Ruckus front disc brake builder combo is perfect for those would would like to pick and chose their own wheel set up and mastercylinders.  SB lowering forks were designed to give you maximum suspension travel with out bottoming out. Stiffer springs, oil filled, and redesigned shock pistons that will improve your suspension performance over any other aftermarket Honda Ruckus, Metropolitan, or Dio forks on the market.

Feign PH80.2 4-piston brake caliper features a 2mm larger brake pads (also thicker for longer life) incomparison to RRGS and Adelin (which are 45mm), the PH80.2 calper uses 47mm brake pads.  Feight PH80.2 is made from CNC billet alumium, that is lighter than Adelin and RRGS. Caliper pistons are also equal size 25mm, where as other PH80's on the market uses a stagged 22mm and 25mm pistons on each side.


 Combo Kit Components:

  • 1. Feign SB lowering forks
  • 2. Feign 4-piston PH80.2 brake caliper w/ brake pads
  • 3. Feight PH80 220mm brake caliper adapter
  • 3. Feign 220mm floating brake rotor
  • 4. Feign T-7075 12mm aluminum Ruckus axle. 


Fork Features:

  • - Fully CNC from billet aluminum
  • - Upgraded internal shock piston for better rebound and dampening performance
  • - Lower ride height to lower center of gravity for better handling and control
  • - Rebuildable
  • - Accepts most aftermarket non-JDM brake caliper adapters (RRGS, NCY, ATR, etc) 
  Fork Specifications:
  • - Total Length: 13.75" 
  • - Fork Body Length: 7.5"
  • - Travel Shaft Lengh: 6.25"
  • - Shaft Diameter: 27mm
  • - Axle Diameter: 12mm 
  Caliper Features:
  • - Fully CNC from billet aluminum
  • - Equal diameter caliper pistons, 25mm all around
  • - 10.3oz total weight (lightest incomparison to comparable calipers = 14.6oz Adelin, 1lbs-2oz RRGS) 
  • - Larger and ticker brake pads
  • - Recessed bolt holes (cleaner appearance and overall look
  • - Shallow rear half of the caliper for additional caliper to rim clearance




  • - Builder kits does not include brake line, brake mastercylinder, or wheel spacers. These parts are to be selected by the builder because it depends on their choice and set up.
  • - Hardware is not included, please see our Fab Parts section for hardwares that you may need.