Composimo 6.5" Rear Lowering Link Grom 125

Composimo 6.5" Rear Lowering Link Grom 125

SKU #: CMO-1014
Composimo 6.5" Rear Lowering Link for Honda Grom 125! Bolt-in rear lowering kit that will allow you to achieve the stance and lowered ride height that you desire!

$70.00 In stock


Availability: In stock

  Kit requires no drilling, and can be installed with the bike on the ground with the bike properly supported (because you have to remove the rear shock).     This kit DOES require the use of a slip-in stretch on the stock swingarm... this will not fit aftermarket swingarms!     The stock rear 'hugger' fender can still be used, but will require trimming to fit!     This kit does lower the bike a decent amount, so consequently you may have clearance issues with aftermarket shocks that have external reservoirs on them. You WILL also likely have to shorten/modify the kick stand (Billet Aluminum Lowered Kickstands are also available!)   When you lower a motorcycle, it does look better, but there are compromises! Don't expect the bike to lean the same in the turns like it did when it was stock!     A STRETCH KIT IS REQUIRED! Since the position of the shock is moved towards the back, the bracket will come into contact with the rear tire if a stretched kit isn't used.       **IMPORTANT: Actual lowering height will vary... The added length of a stretch will cause the swingarm/axle-height in relation to the frame to move further than the stock length swingarm when lowered... with a stock swingarm length, it is closer to ~1.5" of lowering height... with the extended swingarm it is closer to 1.75-2" of lowering, depending on the length of stretch you choose