Chimera Front Foot Kick Rail (Footrest Bar) NPS50 Ruckus CHF50 Metropolitan

Chimera Front Foot Kick Rail (Footrest Bar) NPS50 Ruckus CHF50 Metropolitan

SKU #: CH-1096
$60.00
Chimera Front Foot Kick Rail for 2002 - Present NPS50 Honda Ruckus and 2002 - 2012 CHF50 Honda Metropolitan! A great and simple light weight accent pieces that will allow you to do multiple things with it! Add foot pegs to make it into a footrest bar, mount your GPS on there, attached a clamp on the cup holder, and much more!
$60.00 In stock

Description
Additional

Availability: In stock

Chimera Front Foot Kick Rail for Honda Ruckus or Honda Metropolitan does come with pre-drilled and M8x1.25mm threaded holes so that you could install pegs onto it and turn it into a footrest bar! You could also mount accessories such as a GPS or phone holder on it. Powder-coated semi-gloss black, but feel free to paint it or powder coat it to match the color of your bike!Will fit both 2002 - 2021 Honda Ruckus NPS50 and 2002 - 2012 Honda Metropolitan CHF50 (if you decide to keep the factory floorboard on your Honda Ruckus or Honda Metropolitan, then you will need very long screws to secure the brace (which is not included, see the installation overview below).

Content:

  • Chimera Kick Rail Footrest Bar
  • 2x M8 Mounting Bolts (secures to the Kick Rail to the chassis)

Fitment:

  • 2002-present Honda Ruckus (NPS50) (would need additional hardware if mounting on top of OEM plastic floorboards)
  • 2002-2012 Honda Metropolitan (CHF50) 1st Gen (would need additional hardware if mounting on top of OEM plastic floorboards)

Installation Overview:

OEM Floorboard Removed:

  1. To mount the Kick Rail, remove the two front 6mm nut clips under the gas tank.
  2. Drill/ream out the frame holes to M8, which would allow the M8 mounting bolts to pass through.
  3. Pair the Kick Rail Foot Rest with your favorite pegs and secure them with M8x1.25 bolts (NOT INCLUDED, peg and hardware vary on the peg set up.)

On top of the OEM Floorboard:

  1. To mount the Kick Rail with the OEM floorboard, remove the quick-nut clips under the gas tank.
  2. Drill/ream out the floorboard base holes to M8, which would allow the M8 mounting bolts to pass through.
  3. ADD aluminum spacers or a stack of washers on each of the mounting holes on top of the OEM floorboard till it's slightly above the floorboard. (NOT INCLUDED)
  4. Place the X-Factor Footrest in position on top of the spacers. ADD the necessary M8 bolts and go from the bottom of the frame upward to secure the footrest onto the chassis. (NOT INCLUDED)
  5. Pair the Kick Rail Foot Rest with your favorite pegs and secure them with M8x1.25 bolts (NOT INCLUDED, peg and hardware vary on the peg set up.)

 

 

Pegs are not included, please see related items for foot peg options. The peg shown in the reference photos is JSB Fabrication Derlin 3" Slider Pegs. 

Made in the USA!

Warning-icon WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov -- Learn More