212cc Zongshen 2 Valve Performance Crate Engine ZS190
- Wiseco Forged Piston and Rings (Made in USA).
- Cylinder Sleeve bored to 66mm.
- Brand New Engine and Transmission
- 5 Speed Transmission
- Ported & Polish head, valve work, and combustion chamber work, increase air flow (flow bench tested)
- Brand New Starter
- Black out finish
Crate engine only does not include anything else.
NOTE: 212cc Zongshen engines are intended for high performance or racing application. Fine tuning is highly recommended to achieve the best performance and results.
For core engines, only the engine is needed to be shipped back. Remove your carburetor, manifold, exhaust, and any aftermarket parts you have on your original ZS190 engine, i.e. aftermarket plugs, aftermarket oil dipsticks, NGK coil, and wire, etc.
*** It's a required procedure to drill the engine mounting holes from 8mm to 10mm for ALL engine swap mounts, such as the Chimera ZS190 Engine swap mount for Grom, Razkull, and Z125pro. Chassis that directly accepts this engine will use the 8mm holes, such as the Kymco K-Pipe and Madass 125. ***
NO WARRANTY ON RACE ENGINE parts or engine bore up kits. There is no warranty stated or implied due to the unusual stresses placed on these parts and because we have no control over how they are installed and used. Steady Garage will not be held liable for any failure or damage caused directly or indirectly from use of these products or engine. The installation and use of these products or engine shall be conclusive evidence that the user assumes full responsibility for any damage caused directly or indirectly by their use.
This product is legal for closed-course competition use only; for racing vehicles (a competition vehicle not used on public highways). Intended for off-road use or race purposes; may not meet regulations of pollution controlled roads or highways. Not legal for vehicles registered and use in California.
NOT AVAILABLE FOR SALE OR USE IN CALIFORNIA.