JHR JC-MESH 1pc 12x8 Rear Rim 3+5, 4x110mm

JHR JC MESH 12x8 Rear Rim. 3+5 offset, 4x110mm bolt pattern is perfect for custom Honda Ruckus and other custom scooters/Mini Motos! Machined from Douglas Wheel Technologies (DWT) solid dish blanks, with chamfer efforts on both sides of the rim.

NOTES:

1. Does not include hub. You would need to purchase the appropriate hubs depending on your application.
2. Please be aware that the chamfer process is carried out to the best of JHR's ability, but due to the DWT blanks not being perfectly flat at the center and exhibiting a bulge where the halves are joined, variations in the depth and visibility of the chamfer may occur. One side might have more chamfer than the other and some area might not have any chamfer due to the thickness variations from the spun process.

Specs:

• Design: JC MESH
• Diameter: 12"
• Width: 8"
• PCD Bolt Pattern: 4x110mm
• Finish: Raw aluminum with minor color blend polish from DWT (not mirror or show quality polish)

SPUN ALUMINUM RIM NOTE:

Douglas Wheel Technologies (DWT) rims are made from spun aluminum, which is originally designed to be used with off-road vehicles, such as ATV and UTV. All Douglas rims have a slight wobble or run-out since they are designed for off-road vehicles that are used on the sands. It's industry standard for spun rims to have some run-outs or up and down movement. The llip edge may contain some slight blems or imperfections as DWT does not package the rims with enough protection during shipping, therefore it's DWT standard to have some blems/imperfections on the lip edge. DWT made their wheels with the intention of them being used hard in the dirt and sand. If you want high quality rims, please look into Chimera Engineering Wheels (CHW).

NOTE:

Photos are for reference only, the actual rim will vary in shape and appearances depending on size ordered.