High Performance Racing Clutch Kit for Honda Ruckus (2002+), Metropolitan (2002-2011)
High Performance Racing Clutch Kit for Honda Ruckus (2002+), Metropolitan (2002-2011)
High Performance Racing Clutch Kit for Honda Ruckus (2002+), Metropolitan (2002-2011)
Sold Out
  • SKU: HOCA-1021

High Performance Racing Clutch Kit for Honda Ruckus (2002+), Metropolitan (2002-2011)

$125.00
Shipping calculated at checkout.
    DESCRIPTION

    High Performance Racing Clutch Kit for Honda Ruckus NPS50 (2002+) and Metropolitan CHF50 (2002-2012)!

    Includes 1500RPM torque spring and 1000RPM clutch springs already installed.


    High Performance Clutch Set with a Ventilated Clutch Bell for Honda Ruckus 50cc (2002-2022) and Honda Metropolitan (2002-2012).

    The Clutch of your bike is often overlooked when looking for extra power. This clutch allows you to control when you would like the power band to be engaged by allowing you to change the torque and contra springs. This clutch kit is a great upgrade for the Honda Ruckus Metropolitan GET engine to deliver power to the wheel!

    INSTALLATION NOTE:

    For the Honda GET 50cc engines, you would need to run the magic spacer that is included with the clutch kit. The magic spacer goes onto the transmission shaft first, then you slide the clutch into position, and then the clutch bell. The clutch will not spin or move if you do not use the magic spacer. Magic spacer SKU #: CH-1083 if you would like to purchase extra or spares.

    TUNING NOTES:

    Tuning the CVT transmission does take time to get it dialed in. The clutch tuning needs to be balanced out with the variator weights, so both setup matters. We recommend having the spring at the softest setting, which is no tension on the springs at all. You will need a range of 4g through 7g roller weights to use and test to find the perfect combination for your rider weight, variator setup, and engine performance.
    You could purchase tuning weight sets to help with your CVT tuning, this is the most cost-effective way to tune the variator weights: SKU#: HOCA-1011 or SKU#: PLN-1024

    Fits QMB139 and GET 50cc engines.

    • Clutch Bell Inner Diameter: 107mm
    • Clutch Bell Outer Diameter: 118mm
    • Pulley Outer Diameter: 118mm
    • Clutch Inner Diameter: 12mm
    • Uses 6901 RS bearing
    • Number of Splines (clutch bell): 22
    • Splined Inner Diameter (peak to peak): 11mm
    • Splined Inner Diameter (valley to valley): 12mm
    • Adjustable Drive Sheave
    • 1500 RPM Torque Spring
    • Made in Taiwan

    ⚠ WARNING: California Proposition 65 www.P65Warnings.ca.gov.

    RECENTLY VIEWED PRODUCTS

    BACK TO TOP