JHR JC-MESH 1PC RIM SET - 12x8 REAR, 12x4 FRONT - HONDA RUCKUS GY6 FATTY

JHR JC-MESH Rim set for GY6 Fatty Set up! These are machined from DWT rims blanks, 1PC design, perfect for 8" Fatty set up for GY6 engine swaps.

CONTENT:

• 1x REAR: JHR JC MESH 12x8, 3+5 Offset, 4x110 (4/110) Bolt pattern, 12mm stud holes
• 1x FRONT: JHR JC MESH 12x4, 2+2 Offset, 4x91 (4/90) Bolt pattern, 8mm stud holes
• POLISHED

NOTES:

1. Does not include hub. You would need to purchase the appropriate hubs depending on your application.
2. Please be aware that the chamfer process is carried out to the best of JHR's ability, but due to the DWT blanks not being perfectly flat at the center and exhibiting a bulge where the halves are joined, variations in the depth and visibility of the chamfer may occur. One side might have more chamfer than the other and some area might not have any chamfer due to the thickness variations from the spun process.

Douglas Wheel Technologies (DWT) rims are made from spun aluminum, which is originally designed to be used with off-road vehicles, such as ATV and UTV. All Douglas rims have a slight wobble or run-out since they are designed for off-road vehicles that are used on the sands. It's industry standard for spun rims to have some run-outs or up and down movement. The lip edge may contain some slight blems or imperfections as DWT does not package the rims with enough protection during shipping, therefore it's DWT standard to have some blems/imperfections on the lip edge. DWT made their wheels with the intention of them being used hard in the dirt and sand. If you want high quality rims, please look into Chimera Engineering Wheels (CHW).