RacingBros Front Fork Anti Dive System - Honda Trail 125 CT125 (ALL YEARS)
RacingBros Front Fork Anti Dive System - Honda Trail 125 CT125 (ALL YEARS)
  • SKU: RBROS-1060-6.5NMM

RacingBros Front Fork Anti Dive System - Honda Trail 125 CT125 (ALL YEARS)

$236.61 $239.00
Shipping calculated at checkout.
    DESCRIPTION

    RacingBros Front Fork Anti Dive System for Honda Trail 125 CT125 (ALL YEARS, EFI version)! Completely improve the Trail 125 front suspension by increasing firmness, added flexibility with adjustable pre-load fork caps, improve dampening performance, and reduce front end dive all in one kit! The Anti Dive System includes new stiffer front springs, Anti Dive Blue Valves, and Adjustable Spring Pre-Load Fork Caps, which is the ultimate front suspension kit for the Trail 125! The Anti Dive installation could be done with simple hand tools!

     

    ANTI DIVE GENERAL INSTALLATION MANUAL


    Have you ever been bothered by the weak compression damping of the original front forks that cause diving too much? Or you feel unconfident when you're cornering?

    The RacingBros Anti Dive System can solve these problems!
    With RacingBros Anti Dive System, it could increase up to 40% compression stiffness compared to the OEM factory setup. High quality springs and dynamic valve will reduce front dive, in turn would provide better handling when you are carving through the corner. Enjoy a better ride and rule the road!

    RacingBros recommend to use 10wt oil.

    Available Spring Rates:

    • 6.5N/mm fork spring: Riders up to 220lbs
    • 7N/mm fork spring: Riders above 220lbs

    PRODUCT DETAILS

    • Technologies and setting from Asia Road Racing Championship (ARRC)
    • Check valve damping piston design: Increase the compression damping force and high sensitive rebound force.
    • Quick to install: Complete installation without dismantling the damping tube or changing the oil.
    • Compression damping adjustable (via valve spring length adjustment).
    • Spring preload-adjustable: 0-12mm.
    • Super High Strength JIS G3560 Cr-Si steel spring.
    • AL-6061 T6 preload body and damping piston.

    FITMENT:

    • 2019+ Honda Trail 125 (CT125)

    RacingBros don't recommend modifying the stock damping rods, such as drilling holes. Alteration to the stock damping rod may cause unpredictable function or performance. 

    NOTE: For those who prefer to have helper springs over the included long aluminum spacer tube from RacingBros, please look into SKU: CH-1413. This kit will replace the long RacingBros Aluminum spacer entirely (included short spacers + springs). This kit would allow additional suspension travel for the Racing Bros Front Anti Dive Kits for the Honda Trail 125 CT125.  

    ANTI DIVE GENERAL INSTALLATION MANUAL

    Customer feedback from Jason K. from Ohio!

    These valves do provide some rebound, just enough to reduce the hard top out slam (from catching air). It's more of a dull thud vs a hard metallic clank, better than before and of course compression feels way better. There are online comments about these short springs reducing travel. That's definitely not the case. It's a 10" spring for 4.5" of travel. A full-sized adventure bike has 20" springs for 9.5" of travel so it's essentially the same game. I swapped from 10wt to 15wt oil and it feels even better! Hopefully this is useful information for future customers! 

    Thank you Jason K. for the information and feedback!

    ⚠ WARNING: California Proposition 65 www.P65Warnings.ca.gov.

    RECENTLY VIEWED PRODUCTS

    BACK TO TOP