4 Pin Female connector, great for custom wire harnesses and custom application. Will work with Honda Ruckus and Honda Metropolitan right hand control connection.Stop trying to save and reuse old...
NCY GY6 Transmission Gear SetAvailable in15x36 = 2.4:115x37 = 2.46:115x38 = 2.53:116x36 = 2.25:116x38 = 2.375:114 x 36 = 2.57:1Get the most out of your big bore kit, with increased...
M5 Flat Head Dress Up Washer for flat head type screws. Anodized Black aluminum finish, however removing the anodize is possible, which will allow you to finish it however you...
NCY Super Transmission Set for GY6 This Super Trans Kit is one of the best dollar-for-dollar bolt-ons to improve your bike! Quicker accelleration, higher top speeds, and...
NCY Tapered Handlebar Universal fit for 1-1/8" diameter handlebar risers! Please see related items below for 7/8" to 1-1/8" diameter riser clamps!NCY Tapered Handlebar 1-1/8", universal fit for 1-1/8" risers!...
Motion Pro Air Chuck Fill Tool Pivoting angled head design allows access to difficult to reach tire valves Unique design provides added hand clearance between filler and hot brake...
Koso GY6 Super Flow Oil Pump 125/150ccKoso GY6 Super Flow Oil Pump 125/150ccKoso’s High-Flow Oil Pump for 125/150cc GY6 engines is strongly recommended for those who upgraded their engine with...
NCY Golden Pulley Variator Assembly for GY6 150ccEnjoy smoother acceleration and more power in the mid and high ranges with this variator. The variator is PTFE coated to ensure fluid...
NCY ABS composite gas tank cover for Honda Ruckus. A must when you remove the stock plastic floor boards. To give your Honda Ruckus that custom look, you're more than...
H4 Ceramic Headlight Connector Female Coupler Connector with Wire LeadStop trying to save and reuse old connectors from your old headlight! Just start fresh with brand new pins to prevent...
Renthal Zero-Offset Handlebar mount/clamp for 1-1/8" handlebars. Fit fit Honda and Kawasaki! A must have item to change from 7/8" handlebars to 1-1/8"!Renthal Zero-Offset 1-1/8" (28.6mm) handlebar clamps/mounts are perfect...
Injection-molded Krayton synthetic rubber. These grips are made from the same material used in dirt bike and BMX grips: Kraton Rubber. They are softer and more comfortable but also wear...
Bel-Ray® Gear Saver Hypoid Gear Oil features Bel-Ray’s state-of-the-art Extreme Pressure chemistry to give unsurpassed protection for heavily-loaded shaft drive and final drive units. Extend the life of your transmission...
9 Pin male connector, great for custom wire harnesses and custom application. Will work with Honda Ruckus and Honda Metropolitan left hand control connection.Stop trying to save and reuse old...
6 Pin male connector, great for custom wire harnesses and custom application. Will work with Honda Ruckus and Honda Metropolitan head light connection.Stop trying to save and reuse old connectors...
Chimera Engineering Intake Manifold Clocking Flange for the Honda PCX 150 Engine. Clocking Flange is needed when doing a PCX Swap to a Honda Ruckus. Positions the throttle body in the...
PRODUCT PHOTO FOR REFERENCE ONLY. THE ACTUAL LOOK MIGHT LOOK SLIGHTLY DIFFERENT DUE TO THE HUB AND THE SIZE OF THE RIM. JHR JC MESH 12x5 Rear Rim. 3+2 offset,...
Brembo PS13 Brake Master Cylinder - Black
Specifications:
13mm piston diameter
complete with lever and reservoir and mirror mount.
Brake Fluid DOT 4, or 5.1
- mirror clamp, Standard with M10x1,25 right side, black from Brembo for master cylinders- fits for many OEM - brake master cylinder and clutch master cylinder - including 2 screws for
19.8x30x5 mm Crankshaft oil seal. Crankshaft Oil Seal; GY6 125cc-150cc A new gasket is recommended every time you take your engineapart to prevent an oil leak which can lead to...
The ProTaper SE bar is Pro Taper’s seven-eighths inch diameter handlebar designed for riders who still prefer the look, feel, and stability of a bar with a cross brace. Constructed...
Gojin 12V 35W LED H4 Headlight Bulb Gojin red LED rear turn signals. These super bright turn signals illuminate in a sequential pattern rather than flashing! They can be used...
JHR Dragger 12x5 Rear Rim. 3+2 offset, 4x140mm and 4x144mm bolt pattern is perfect for Honda Ruckus using the Kymco, Sym, or Daytona rear hubs! Machined from Douglas Wheel Technologies...
NCY Quick Draw Throttle 7/8" for Honda RuckusBoost your the throttle response on your ruckus with this quick draw throttle from NCY. Will work with any 7/8 (22mm) handlebars.Comes with...
CHIMERA Engineering Axle Nuts - 14mm x 1.5mm Sold Individually.Available in Anodized: Black,Blue.Gunmetal Grey, Red, and Silver.CHIMERA Engineering Axle Nuts - 14mm x 1.5mm Sold Individually.Available in Anodized: Black,Blue.Gunmetal Grey,...
Domino A360 Off- Road 7/8" Open End GripsAvailable in: Black/Green Black/Grey Black/Red Blue/White Grey/Orange The all new Domino A360 off road grip is the culmination of: 70 years of experience...
