{"title":"CHIMERA ENGINEERING","description":"","products":[{"product_id":"chimera-rz1-zuma-125-swap-mount-for-honda-ruckus-non-fatty","title":"CHIMERA RZ1 Zuma 125 Swap Mount For Honda Ruckus Non-Fatty","description":"\u003cp\u003eChimera RZ1 Zuma 125 swap engine mount for Honda Ruckus (NON FATTY SETUP).\u003c\/p\u003e\n\u003cp\u003eChimera engine mount and extension kits have been tested\/R\u0026amp;D for 3-years before it's sold to enthusiasts. One of the first and one of the original bolt-on engine swap mounts for a Yamha Zuma 125 engine going onto a Honda Ruckus.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e9-13-18: PRODUCT UPDATE! The upper shock mount has been redesigned to fit at the stock location. The one shown on the photo has been changed to the new design. The one show on the photo is no longer available. Updated photos would be posted shortly. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eChimera RZ1 engine swap mount kit will allow you to swap a Yamaha Zuma 125 engine onto a Honda Ruckus. Complete bolt-on design that requires no welding to the Honda Ruckus rear frame. RZ1 is the original bolt-on engine swap mount for the Yamaha Zuma 125 '5S9' engine to a Honda Ruckus, carefully engineered and tested for thousands of miles before being release to the Honda Ruckus community.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNon-Fatty:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRZ1 Non-Fatty engine mount\u003c\/li\u003e\n\u003cli\u003eLower shock mount (mounts on Engine)\u003c\/li\u003e\n\u003cli\u003eUpper shock mount\u003c\/li\u003e\n\u003cli\u003eand all necessary mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNon-Fatty (use with OEM Zuma 125 rear rim and swing arm. If you don't want to run the secondary right side swing arm, then you will need a optional axle spacer, or a custom short axle).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNOTE:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRZ1 engine mount set requires a Low Stance Rear Shock. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor Honda Metropolitan owners, the Chimera RZ1 engine mount will also work with some modification, please contact us for more information!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: xx-small;\"\u003eChimera RZ1 swap mount is patent pending.\u003c\/span\u003e\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823236165691,"sku":"CH-1025-01","price":550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/smallphotorz1nf_1.jpg?v=1665433821"},{"product_id":"chimera-rz1-zuma-125-swap-mount-for-honda-ruckus-7-fatty","title":"Chimera RZ1 Zuma 125 Swap Mount For Honda Ruckus 7\" FATTY","description":"\u003cp\u003eChimera RZ1 Zuma 125 swap engine mount for Honda Ruckus (7\" Wheel Set Up).\u003c\/p\u003e\n\u003cp\u003eChimera engine mount and extension kits have been tested\/R\u0026amp;D for 3-years before it's sold to enthusiasts. One of the first and one of the original bolt-on engine swap mount for a Yamaha Zuma 125 engine going onto a Honda Ruckus.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e9-13-18: PRODUCT UPDATE! The upper shock mount has been redesigned to fit at the stock location. The one shown on the photo has been changed to the new design. The one show on the photo is no longer available. Updated photos would be posted shortly.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eChimera RZ1 engine swap mount kit will allow you to swap a Yamaha Zuma 125 engine onto a Honda Ruckus. Complete bolt-on design that requires no welding to the Honda Ruckus rear frame. RZ1 is the original bolt-on engine swap mount for the Yamaha Zuma 125 '5S9' engine to a Honda Ruckus, carefully engineered and tested for thousands of miles before being release to the Honda Ruckus community.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e7\" Fatty:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRZ1 7\" Fatty engine mount\u003c\/li\u003e\n\u003cli\u003eLower shock mount (mounts on Engine)\u003c\/li\u003e\n\u003cli\u003eUpper shock mount\u003c\/li\u003e\n\u003cli\u003eand all necessary mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Parts needed:\u003c\/strong\u003e Chimera RZ1 Fatty mount will also need the following parts in order for you to get the engine swap onto a rolling chassis (list does not include detailed information\/parts because each builder prefer different parts and set up for the remaining items. Example: gas tank set up, exhaust set up, rear brake set up, etc.)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e12x7 or 13x7 Rim (contact us for options available)\u003c\/li\u003e\n\u003cli\u003eChimera Zuma 125 Rear disc Brake Conversion Kit\u003c\/li\u003e\n\u003cli\u003eCustom Wire Harness (contact us)\u003c\/li\u003e\n\u003cli\u003eRear Low Stance Shock, 245mm or shorter (Racing Bros, ATR, NCY)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNOTE: For Honda Metropolitan owners, the Chimera RZ1 engine mount will also work with some modification, please contact us for more information!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: xx-small;\"\u003eChimera RZ1 swap mount is patent pending. \u003c\/span\u003e\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823236329531,"sku":"CH-1025-02","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/smallphotorz1mountkit_1.jpg?v=1665433681"},{"product_id":"chimera-sk-4x140-to-4x110-sym-kymco-hub-adapter-1-thick-honda-ruckus-metropolitan","title":"Chimera SK 4x140 to 4x110 Sym-Kymco Hub Adapter 1\" Thick- Honda Ruckus\/Metropolitan","description":"CHIMERA SK 4 hub adapter will convert the existing 4x140mm bolt pattern to 4x110 on Sym-Kymco hubs. Chimera SK adapter is  1\" Thick, ideal for custom Honda Ruckus, custom Honda Dio, or custom Honda Metropolitan.\u003cbr\u003e\u003cp\u003eChimera SK Sym-Kymco hub adapter allows you to convert the existing 4x140mm bolt pattern hub to 4x110mm. This hub will also allow you to run a rim with 4inches of back spacing on your Honda GET 50cc engine. Chimera SK adapters are hub centric, which will insure that the mounted wheel is directly centered and the loads are distributed correctly through the hub (not on the wheel studs\/bolts). Chimera SK adapters will not only hide the uglyness from the original Sym-Kymco casting without hindering safety, but it's also has a light weight design! Perfect match for Daytona 8 Hole rims and much more other options for your custom Honda Ruckus\/Honda Metropolitan.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eNote: 4x110mm bolt pattern will only accept Dish or Solid type of rims. \u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823236788283,"sku":"CH-1029","price":72.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/smallphotohub-adapter.jpg?v=1665434346"},{"product_id":"chimera-weld-on-fuel-injection-bung-for-yamaha-zuma-125-swap","title":"Chimera Weld-On Fuel Injection Bung for Yamaha Zuma 125 Swap","description":"Chimera Weld-on fuel injection bung for custom gas tanks and Zuma 125 engine swaps.\u003cbr\u003e\u003cp\u003eChimera weld-on fuel injection bung for Yamaha Zuma 125 fuel injection system. Perfect for those who are swapping a Yamaha Zuma 125 engine into their project bike, from custom Honda Ruckus, custom Honda Metropolitan, to custom Yamaha C3, or other applications! Perfect for custom gas tanks made for your Yamaha Zuma 125 or anything that would be using Yamaha Zuma 125 fuel pump assembly, and fuel injector.\u003c\/p\u003e\u003cp\u003eDesigned to be used with the OEM Yamaha high pressure fuel injector hose that was included with the Yamaha Zuma 125. Designed for those who are planning to customize their fuel tank set up to have an internal fuel pump will need this bung. This allows you to use the OEM fuel hose and fuel injector with out the need to retrofit the injector so it could be used with other hoses.\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823236952123,"sku":"CH-1008","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/smallphoto-fi-bung_1.jpg?v=1665434027"},{"product_id":"chimera-yamaha-zuma-125-rear-disc-brake-conversion-kit","title":"Chimera Yamaha Zuma 125 Rear Disc Brake Conversion Hub","description":"Chimera Yamaha Zuma 125 rear disc brake conversion components.\u003cbr\u003e\u003cbr\u003eNow includes thread-in M12x1.5x44mm wheel studs!\u003cbr\u003e\u003cp\u003eChimera Yamaha Zuma 125 '5S9' engine rear disc brake conversion kit. Chimera rear disc brakes is a significant upgrade in comparison to the original rear drum brake system. Chimera Yamaha Zuma 125 engine rear disc brake conversion will require removing the right side swing arm and usage of aftermarket rear rim; perfect to be used in conjunction with fatty rear rim\/wheel. Chimera designed the rear hub with all users in mind, universal bolt pattern that will accept many rear rims: 4x100, 4x101.6, 4x110, 4x114.3, all of the stud holes are M12x1.5. Thread in wheel studs are included!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eRequired (but not included with kit): Aftermarket rear rim, PH80 type brake caliper, 3 bolt Honda Ruckus 200mm+ brake rotor.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eIncludes axle spacer for those who haven't had their existing axle modified. For Zuma 125 short axle, please see related item below.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eNOTE: Modification to your engine is require (as it typically does for ALL engine-case-type rear disc brake conversion). Axle modification\/shortening service is also available. Contact us for more info. If you would like us to prepare everything you need to make it as complete as possible, please contact us.\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823237017659,"sku":"CH-1038","price":235.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/smallphoto5s9rdisccon.jpg?v=1665434065"},{"product_id":"fuelpressuregaugedapter","title":"Chimera Honda Acura High Flow Fuel Pressure Gauge Adapter Kit","description":"Chimera high flow fuel pressure gauge adapter for most Honda and Acura engines.  Chimera high flow adapter has two additional holes to increase fuel flow.  \u003cbr\u003e\u003cbr\u003eKit includes:\u003cbr\u003eStainless steel 12mm Banjo Bolt with 1\/8\" NPT thread\u003cbr\u003e90° gauge adapter\u003cbr\u003e\u003cdiv\u003eWill fit most B-Series, D-Series, and H-Series Honda engines as well as Mitsubishi Eclipse's. Best and easiest way to add a liquid fill oil pressure gauge to monitor your fuel pressure.  Typical fuel pressure adapters only has two holes, the Chimera high flow adapter has 4 holes. Machined from stainless steel.\u003c\/div\u003e\u003cdiv\u003e\u003c\/div\u003e\u003cdiv\u003e\u003c\/div\u003e\u003cdiv\u003e\u003c\/div\u003e\u003cul\u003e\n\u003cli\u003e-92-00 Honda CIvic\u003c\/li\u003e\n\u003cli\u003e-90-01 Acura Integra\u003c\/li\u003e\n\u003cli\u003e-93-97 Honda Del Sol\u003c\/li\u003e\n\u003cli\u003e-92-96 Honda Prelude\u003c\/li\u003e\n\u003cli\u003e-91-00 Acura NSX\u003c\/li\u003e\n\u003cli\u003e-88-91 Honda Civic\/CRX\u003c\/li\u003e\n\u003cli\u003e-01-03 Honda S2000\u003c\/li\u003e\n\u003cli\u003e-89-99 Mitsubishi Eclipse\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823250747451,"sku":"CH-1027","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steady_garage_thing_thumb_2e4b8dfa-4f03-45f3-9231-391fa3b03aec.jpg?v=1665018162"},{"product_id":"chimera-osc-slide-carburetor-throttle-cable-honda-ruckus-metropolitan","title":"Chimera OSC 71\" Slide Carburetor Throttle Cable Honda Ruckus Metropolitan","description":"Chimera OSC throttle cable will allow slide carburetors to be installed with stock throttle control kit. The OSC cable will also work with any aftermarket throttle tube\/cam that accepts a threaded throttle cable. Ideal for those who are upgrading from stock on custom Honda Ruckus or Honda Metropolitan. Chimera OSC throttle cable will also work with other motorcycles or scooters that has the same threaded fitting for the throttle control unit and tube.\u003cbr\u003e\u003cp\u003eChimera OSC slide carburetor throttle cable are approximately 71\" long. Slack adjusters were added on both ends to make this the perfect throttle cable for any type of carburetor set up and bikes.\u003c\/p\u003e\u003cp\u003eMade in USA.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eCustom length and size are available. Please contact us for prices.\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823250976827,"sku":"CH-1018-071","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steady_garage_cable.jpg?v=1664288039"},{"product_id":"chimera-stage-6-to-cvk-carburetor-throttle-cable","title":"Chimera Stage 6 to CVK Carburetor Throttle Cable","description":"Chimera Stage 6 to CVK throttle cable will allow Stage 6 (SSP) controls to be installed with CVK carburetors. Ideal for those who are upgrading from stock handle controls to Stage 6 or KOSO units. Chimera SSP to CVK throttle cable will also work with other motorcycles or scooters that has the same  type of fitting for the carburetor (all Stage 6 or KOSO throttle assembly are the same).\u003cbr\u003e\u003cp\u003eChimera Stage 6 to CVK throttle cable are approximately 79\" long (end to end). Slack adjusters were added to make this the perfect throttle cable for most type of carburetor set up and bikes.\u003c\/p\u003e\u003cp\u003eMade in USA.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eCustom length and size are available. Please contact us for prices.\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823251599419,"sku":"CH-1028","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_ssptostockcablethumb.jpg?v=1665434360"},{"product_id":"chimera-unlimited-gy6-drum-hub","title":"Chimera Unlimited Rear Drum Brake Hub V2 - GY6 125 \/ 150, Honda Navi 110cc","description":"\u003cp\u003e\u003c!-- x-tinymce\/html --\u003e\u003c\/p\u003e\n\u003cp\u003eV2 Chimera Unlimited rear drum hub for GY6 125cc and 150cc long case engines!\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp data-start=\"0\" data-end=\"454\"\u003eThe Chimera Unlimited GY6 Rear Drum Hub lets you mount most common aftermarket wheels with ease! Designed for precision and performance, the hub features a 68mm centric hub diameter to ensure perfect alignment and balanced lateral distribution, which allows the use of hub-centric rings for an exact fit to the wheel you plan on mounting. Expertly machined from T-6061 aluminum and equipped with a pressed-in high carbon cast iron steel brake lining, it delivers strength, reliability, and performance.\u003c\/p\u003e\n\u003cp data-start=\"0\" data-end=\"454\"\u003ePerfect for custom Honda Ruckus with GY6 swaps or any scooters\/motorcycles that uses the GY6 125\/150cc engines that's looking to mount a fatty rear wheel. Will also allow aftermarket fatty rear wheel to mount on a Honda Navi 110! \u003c\/p\u003e\n\u003cp data-start=\"456\" data-end=\"475\"\u003eKey Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"478\" data-end=\"647\"\u003eHigh Carbon Cast Iron brake lining sleeve – Provides excellent heat resistance, slower expansion under heat, and a rougher surface for improved brake shoe grip and longevity.\u003c\/li\u003e\n\u003cli data-start=\"478\" data-end=\"647\"\u003eRibbed construction – Enhances heat dissipation for better cooling while reducing overall weight.\u003c\/li\u003e\n\u003cli data-start=\"478\" data-end=\"647\"\u003e68mm Centric Hub with groove ring for centric spacer rings and\/or center caps\u003c\/li\u003e\n\u003cli data-start=\"756\" data-end=\"881\"\u003eThe V2 hub is 8% lighter than the V1\u003c\/li\u003e\n\u003cli data-start=\"756\" data-end=\"881\"\u003eThe V2 hub has been completely refined\u003c\/li\u003e\n\u003cli data-start=\"756\" data-end=\"881\"\u003eIncludes 4pc proprietary M12x1.5mm x 35mm length studs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIdeal for 5\", 6\", 7\", 8\", and 10\" wide rear rim! \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eBolt patterns:\u003c\/div\u003e\n\u003cdiv\u003e- 4x100mm ~ M12x1.5mm\u003c\/div\u003e\n\u003cdiv\u003e- 4x110mm ~ M12x1.5mm\u003c\/div\u003e\n\u003cdiv\u003e- 4x110mm ~ M10x1.5mm (M10 Studs\/Bolts not included. Direct fit to DWT 4x110 wheels)\u003c\/div\u003e\n\u003cdiv\u003e- 4x114.3mm ~ M12x1.5mm\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eFITMENT: \u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eGY6 125cc Long Case QMI Engines\u003c\/li\u003e\n\u003cli\u003eGY6 150cc Long Case QMJ Engines\u003c\/li\u003e\n\u003cli\u003e2017-2026 Honda Navi 110cc\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003eChimera Unlimited GY6 rear drum hub is designed by the originator of the Universal GY6 Drum Hub from 2008!\u003c\/div\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823279419451,"sku":"CH-1033","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/files\/SteadyGarage_OTF_58_TH.jpg?v=1765355025"},{"product_id":"custom-yamaha-zuma-125-short-axle","title":"Custom Yamaha Zuma 125 Short Axle","description":"\u003cp\u003eYamaha Zuma 125 custom short axle by Steady Garage! This is a must for those who are removing the right hand\/secondary swing arm to expose the rear wheel, and for those who are converting to fatty rear rim set up!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCustom machined Yamaha Zuma 125 rear axle that will fit your rear wheel with out the secondary swing arm and\/or for those converting their rear wheel set up to a fatty. Direct fit, simply just remove your old axle and replace it with this one!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNOTE: \u003cstrong\u003eThese axle are machined stock Zuma 125 axle, it may be a \u003cspan style=\"text-decoration: underline;\"\u003eUSED\u003c\/span\u003e axle.\u003c\/strong\u003e \u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823279845435,"sku":"ETC-1043","price":185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadyg_z125shortaxlethumb.jpg?v=1665434572"},{"product_id":"honda-ruckus-mikuni-df-44-fuel-pump-bracket","title":"Honda Ruckus Mikuni DF-44 Fuel Pump Bracket","description":"\u003cp\u003eAluminum bolt on fuel pump bracket for Mikuni DF-44 vacuum fuel pump. This will allow the DF44 fuel pump to mount on the original fuel pump location on the Honda Ruckus. Will also work with Honda Metropolitan.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to install, no drilling or cutting required! Includes all mounting hardware.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823280042043,"sku":"MKNI-1001","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_df8_thumb_11b2c3ed-c89e-4977-b16a-ad85ff5c8dc2.jpg?v=1664288704"},{"product_id":"chimera-yamaha-zuma-125-axle-spacer","title":"Chimera Yamaha Zuma 125 Axle Spacer","description":"Chimera axle spacer for Yamaha Zuma 125!\u003cbr\u003eChimera Axle spacer is ideal for those who would like to remove the right side secondary swing arm to expose the rear wheel. This spacer will fill in the void that is usually left when the swing arm is removed. Made from T-6061 aluminum then polished to a mirror finish!","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823282401339,"sku":"CH-1034","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steady_garage_jt5_th.jpg?v=1664288923"},{"product_id":"chimera-fairing-rod-honda-grom-125","title":"Chimera Fairing Rod - Honda Grom 125 (2014-2020)","description":"\u003cp\u003eOne of the first few power upgrades for 2014-2020 Honda Grom 125 is the basic intake and exhaust to get your engine breathing and flowing. When you remove the factory air box, the left, and right panels will flap around and move because there isn't anything securing the halves. Chimera Honda Grom 125 \/ MSX 125 fairing rod will brace the left and right body panels and prevent them from moving while riding.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eA must have for those who removed the factory air box from their Honda Grom 125. Since there are two mounting tabs that goes from the body panel to the air box, you will need something to secure the two sides once the air box has been removed. Install a Chimera Fairing Rod! Made from T6061 aluminum with a nice anodized black finish.\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823285055547,"sku":"CH-1001","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_fts3_th.jpg?v=1665018280"},{"product_id":"chimera-monkey-front-hub-adapter-ruckus","title":"Chimera Classic Z50 Monkey Front Hub Rotor Adapter - Honda Ruckus","description":"\u003cp\u003eChimera Classic Monkey Hub adapter will bolt directly onto most common Classic Monkey Z50\/Trail front hubs. Design to covert the hub to the much wider rotor bolt patterns commonly found on Honda Dio and Honda Ruckus specific brake rotors. The adapter has a regular thickness so that it could be used with Honda Ruckus triple tree with larger calipers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHardware included to mount the adapter to the Classic Monkey hub!\u003c\/li\u003e\n\u003cli\u003eWill accept any common Honda Dio or Ruckus type of disc rotor (NCY, FEIGN, RRGS, Braking, etc)\u003c\/li\u003e\n\u003cli\u003eDoes not include rotor bolts. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the USA!\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823288660027,"sku":"CH-1024","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_af8_th.jpg?v=1667783389"},{"product_id":"chimera-thumb-screw-honda-ruckus-under-seat-compartment","title":"Chimera Thumb Screw Honda Ruckus Under-seat Compartment","description":"Chimera Thumb Screw allows quick and easy access to the under-seat tray so that getting to your paper work could be done without the need of a tool!\u003cbr\u003e\u003cp\u003eChimera Thumb Screw allows you to gain access quickly and easily to the storage compartment under the OEM seat without a tool! The under-seat compartment allows you to store paper work, documents, and stash away goodies.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eMade in USA!\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823291019323,"sku":"CH-1030","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_ruckustrayscrewth.jpg?v=1664289125"},{"product_id":"chimera-diamond-tail-honda-ruckus-frame-conversion-kit","title":"Chimera Diamond Tail Honda Ruckus Frame Conversion Kit","description":"This popular Honda Ruckus rear frame customization is known as Godzilla Frame in Japan. which was created and designed by Zoomania\/Tokyo Parts. After experimenting with the diamond tails for years in the U.S., Chimera finally release their version of the the Godzilla rear frame! Sold as a completed kit (with main frame and seat frame pieces) or purchase each pieces individually! Buy both and save!\u003cbr\u003e\u003cp\u003eChimera Diamond Tail parts are full custom for those who would like to change the whole look of their Honda Ruckus! Simply cut the rear frame at the section that you wish to do so, weld it, then do some body work and paint it!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eFormed and made in America!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eNote: Chimera Diamond Tail parts are intended for those that wants to do their own fabrication or body work. These parts requires welding, cutting, and then body work. Professional installation is required\/recommended. \u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Diamond Seat Frame Only","offer_id":40823294132283,"sku":"CH-1023-01","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Diamond Main Frame Only","offer_id":40823294165051,"sku":"CH-1023-02","price":80.0,"currency_code":"USD","in_stock":false},{"title":"Both Diamond Seat and Main Frame","offer_id":41512058716219,"sku":"CH-1203","price":160.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygaragediamondtail.jpg?v=1666584302"},{"product_id":"chimera-84-extended-osc-slide-carburetor-throttle-cable-honda-ruckus-metropolitan","title":"Chimera 84\" Extended OSC Slide Carburetor Throttle Cable Honda Ruckus Metropolitan","description":"Chimera OSC throttle cable will allow slide carburetors to be installed with stock throttle control kit. The OSC cable will also work with any aftermarket throttle tube\/cam that accepts a threaded throttle cable. Ideal for those who are upgrading from stock on custom Honda Ruckus or Honda Metropolitan. Chimera OSC throttle cable will also work with other motorcycles or scooters that has the same threaded fitting for the throttle control unit and tube.\u003cbr\u003e\u003cp\u003eChimera OSC slide carburetor throttle cable are approximately 84\" long. Slack adjusters were added on both ends to make this the perfect throttle cable for any type of carburetor set up and bikes.\u003c\/p\u003e\u003cp\u003eMade in USA.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eCustom length and size are available. Please contact us for prices.\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823294820411,"sku":"CH-1018-084","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steady_garage_cable_3.jpg?v=1664289316"},{"product_id":"chimera-custom-kymco-sym-rear-hub-4x136mm-honda-ruckus-metropolitan","title":"Custom Kymco Sym Rear Hub 4x136mm Honda Ruckus Metropolitan","description":"Customized Kymco Sym Rear hub that will allow you to run any 4x136 DWT rear rim! Custom machined to fit the center bore and the 4x136 bolt pattern, no additional machining is need to the rim or hub! The bolt holes on the rim will have to be open up as they are usually 10mm (3\/8\") diameter. Please see drop down menu for rims that fits directly onto the hub.  \u003cbr\u003e\u003cbr\u003eWant to run aftermarket rear wheel on your Honda Ruckus, Honda Metropolitan, or Honda Dio? Look no further! For an affordable price; this hub will get your custom rear rim on a Honda GET 50cc engine or a 2-Stroke AF Honda Dio engine!\u003cbr\u003e\u003cp\u003eGenuine rear drum hub made by Kymco\/Sym. This hub will allow you to mount any 4x136mm bolt pattern rear rim to your Honda Ruckus, Honda Metropolitan, or Honda Dio. This hub will fit most DWT 4x136 rims, which allows for a custom Mini-fatty or a fatty rear rim. \u003c\/p\u003e\u003cp\u003eCapability:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThe complete package comes included with M12x1.5 studs, and a custom machined Kymco\/Sym hub.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823295508539,"sku":"CH-1007","price":150.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_mnt_39_1.jpg?v=1670027432"},{"product_id":"chimera-high-rise-stainless-steel-header-gy6","title":"CHIMERA High Rise Stainless Steel Header GY6","description":"\u003cul\u003e\u003cli\u003eNOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eChimera High Rise Header for GY6 engines! The Chimera High Rise header has the adequate spacing that will allow for 7\" fatty, 8\" fatty (depending on the size of the muffler) or non-fatty rear wheel set up! Will fit any GY6 150cc or 125cc engines.\u003c\/p\u003e\u003cp\u003eBrushed Stainless Steel Finish!\u003c\/p\u003e\u003cp\u003eThe product photos show the polished option, which was an additional $25 service option that used to be available, however, the polishing service is no longer available. \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cspan\u003eChimera High Rise full stainless steel GY6 header. Fitted for non-fatty or 7\" fatty GY6 rear wheel applications, perfect for lowered bikes! Tight fitment is key to the overall appearance of the header, hugging the engine as close as possible to gain additional ground clearance! Match up this header with your desired muffler and get the performance, sound, and style that you're looking for! The header exit is 1.5\" outside diameter, which will allow you to slip-on many small mufflers with an inside diameter of ~1.5\". The runner can be shortened to your desired length! This header is made so that people can customize it with whatever muffler or length that they want!\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eDepending on what size and type of muffler you use, the Chimera High Rise GY6 header will also fit 8\" fatty. Mufflers such as the Megaphone, Short Can, and Chrome Shorty muffler that is slim will fit the 8\". Larger mufflers may come into contact with the 8\" rim, please be aware of this! \u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003ePerfect for GY6 Swap on custom Honda Ruckus, custom Honda Metropolitan, and other custom GY6 equipped scooters.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eLike with any other headers on the market, it's not meant to be used by itself! If you want to run an open header, it's REQUIRED to have a hanger or a bracket to support the header with the engine. Without the proper supporting bracket, the header WILL BREAK at the flange, this would happen to any and all header that doesn't have a support bracket at the end of the header or exhaust.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eNOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823309566011,"sku":"CH-1044","price":148.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_sts09_th.jpg?v=1667150114"},{"product_id":"chimera-universal-breather-oil-catch-can","title":"Chimera Universal Breather Oil Catch Can","description":"\u003cp\u003eChimera Universal breather oil catch can\/tank is designed to catch oil that was mixed in with the blow-by air coming from the engine. Usually the breather tube is not connected to anything, which means it will just shoot down towards the ground, which will dirty your engine and bike.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eChimera Universal breather oil catch canister will help collect the oil\/air mist generated from the pressure caused by the rotating crankshaft, Typically, this air contaminated with oil will recirculate back into the engine through the air box. However if the air box was removed, there's no way to recirculate the air, so the fitting on the engine valve cover will just have nothing connecting to it or a tube that will redirect it downwards. The residue will not only make the engine or bike dirty, but it could also be a safety hazard since the oil will make the rear tire oily; which potentially cause traction lost on the tire.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eChimera Universal breather oil catch can\/tank is made from full stainless steel construction, all brackets and parts are TIG welded together and high polished to a nice mirror finished. Chimera Universal oil catch can will help separate the air and the oil and is easily cleaned by draining or with the use of solvent. Attach the canister anywhere on your bike, from the frame, exhaust hanger, or to the engine itself! Will accept bolts up to 10mm! Giving you the option to mount it and show it off where you desire!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMade in U.S.A.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eApplications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHonda Ruckus\u003c\/li\u003e\n\u003cli\u003eHonda Metropolitan\u003c\/li\u003e\n\u003cli\u003eHonda PCX 125\/150\u003c\/li\u003e\n\u003cli\u003eHonda Grom 125\u003c\/li\u003e\n\u003cli\u003eHonda Elite\u003c\/li\u003e\n\u003cli\u003eHonda Hilex\u003c\/li\u003e\n\u003cli\u003eHonda CB\u003c\/li\u003e\n\u003cli\u003eGY6\u003c\/li\u003e\n\u003cli\u003eYamaha Zuma 50F\u003c\/li\u003e\n\u003cli\u003eYamaha Zuma 125\u003c\/li\u003e\n\u003cli\u003eYamaha C3\u003c\/li\u003e\n\u003cli\u003eYamaha Vino\u003c\/li\u003e\n\u003cli\u003eYamaha SR400\u003c\/li\u003e\n\u003cli\u003eYamaha SR500\u003c\/li\u003e\n\u003cli\u003eYamaha TW200\u003c\/li\u003e\n\u003cli\u003eand more! Universal for all 4-Stroke engines! Motorcycles, Scooters, and Mopeds!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch6\u003eUNIVERSAL Part Fitment Acknowledgment:\u003c\/h6\u003e\n\u003ch6\u003eThis product is classified as a universal motorcycle part, designed to fit a wide variety of motorcycle makes and models. However, due to differences in bike designs, mounting points, and component dimensions across manufacturers, additional parts, modifications, or adjustments may be required to ensure proper installation and optimal performance. Even if this item is listed under the make and model of the motorcycle you are searching for, it may still require extra parts, modifications, or custom fitting to work correctly. In some cases, a bit of creativity and problem-solving may also be useful to successfully mount and secure the part. It is the responsibility of the end user to verify compatibility with their specific motorcycle and to determine any necessary modifications that are or might be needed. If unsure, we recommend consulting a professional installer, technician, or give us a call or send us an email!\u003c\/h6\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823332700219,"sku":"CH-1021","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_jts_6_1.jpg?v=1664290375"},{"product_id":"chimera-unlimited-yamaha-zuma-125-rear-drum-hub","title":"Chimera Unlimited Yamaha Zuma 125 Rear Drum Hub","description":"Chimera Unlimited Yamaha Zuma 125 rear drum hub that will allow you to attach a aftermarket or custom rear rim to your engine! Customize and bring your Yamaha Zuma 125 to the next level by adding a fatty rear rim!!\u003cbr\u003e\u003cbr\u003eNow includes thread-in M12x1.5x44mm wheel studs and Axle Spacer.\u003cbr\u003e\u003cp\u003eChimera Yamaha Zuma 125 '5S9' engine rear drum brake hub. Chimera Yamaha Zuma 125 engine rear drum will require removing the right side swing arm and usage of aftermarket rear rim; perfect to be used in conjunction with fatty rear rim\/wheel. Chimera designed the rear hub with all users in mind, universal bolt pattern that will accept many rear rims: 4x100, 4x101.6, 4x110, 4x114.3, 4x130, all of the stud holes are M12x1.5. Thread in wheel studs are included!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e Axle spacer are optional for those who don't have a short axle. For Zuma 125 short axles, please see related item below.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cspan\u003eIdeal for 5\", 6\", 7\", 8\", and 10\" wide rear rim!\u003c\/span\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cspan\u003eBolt patterns:\u003c\/span\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cspan\u003e- 4x4 (4x101.6) ~ \u003cspan\u003eM12x1.5mm\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cspan\u003e- 4x100mm ~ \u003cspan\u003eM12x1.5mm\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cdiv\u003e\n\u003cspan\u003e- \u003c\/span\u003e\u003cspan\u003e4x110mm ~ \u003cspan\u003eM12x1.5mm\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003cspan\u003e- \u003c\/span\u003e\u003cspan\u003e4x114.3mm ~ \u003cspan\u003eM12x1.5mm\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cdiv\u003e\u003cspan\u003e- 4x130mm ~ \u003cspan\u003eM12x1.5mm\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eNOTE: Axle modification\/shortening service is also available. Contact us for more info.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cspan\u003eChimera Unlimited Zuma 125 rear drum hub is designed by the originator of the Universal GY6 Drum Hub. \u003c\/span\u003e\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823351607355,"sku":"CH-Z125-RDRUM","price":295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_ftf_11_th.jpg?v=1667783553"},{"product_id":"chimera-silicone-intake-coupler-gy6-get","title":"Chimera Silicone Intake Coupler GY6 GET","description":"Chimera Engineering silicone intake couplers! Perfect and durable replacement over the rubber couplers, which usually cracks and causes air leak. The Chimera coupler inside diameter is 30mm, which will fit any intake manifold or carburetor inlet that is 29-34mm; such as aluminum GY6 intake manifolds, Honda GET 49cc engines with aftermarket carbs, and much more! Will also work other applications as well!\u003cbr\u003e\u003cp\u003eChimera Engineering silicone intake couplers is the perfect upgrade and replacement over the OEM rubber couplers. Over time, the rubber will harden, get brittle, and it'll eventually crack. The Chimera silicone intake coupler also fits a lot better than the OEM rubber coupler with aftermarket carburetors, which better secure the carburetor to the manifold!\u003c\/p\u003e\u003cp\u003eSpecs:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInside Diameter: 30mm (1-3\/16\")\u003c\/li\u003e\n\u003cli\u003eWill carburetors and manifolds between 29-34mm\u003c\/li\u003e\n\u003cli\u003eHose clamps are not included, (Recommend 21mm - 44mm, see related items below)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eNote: Carburetor and manifold shown in the photos are for reference only, it's NOT included.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823382900795,"sku":"CH-1051","price":6.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_ftf_21.jpg?v=1664291257"},{"product_id":"chimera-yamaha-sr400-air-intake-system","title":"Chimera Cold Air Intake - Yamaha SR400 (2014-2017)","description":"\u003cdiv\u003eChimera Engineering Intake System for Yamaha SR400! If you're looking for additional power and engine performance, look no further! Adding the Chimera Air Intake system will improve throttle response and power to your SR400! Available in polish or powder-coated texture black intake.\u003c\/div\u003e\r\n\u003cdiv\u003e\u003c\/div\u003e\r\n\u003cp\u003e\u003cstrong\u003ePlease select from the options below for all of the components.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eChimera Intake System contents and options:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eChimera Intake Pipe\u003c\/li\u003e\r\n\u003cli\u003e3 ply silicone intake coupler\u003c\/li\u003e\r\n\u003cli\u003e2x hose clamps\u003c\/li\u003e\r\n\u003cli\u003eStainless steel battery tray support bracket\u003c\/li\u003e\r\n\u003cli\u003eStainless steel EGR delete plate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eOPTIONAL ITEMS- Select from the PRODUCT ADDON BOXES to complete the system:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eK\u0026amp;N Universal RD-0700 Air Filter (Pre-oiled with lifetime warranty)\u003c\/li\u003e\r\n\u003cli\u003eK\u0026amp;N Universal Vent Breather Filter\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eChimera Engineering air intake system for SR400 is a must have item to open up your SR engine and allow it to breathe! Chimera designed this intake to maximize air flow into the engine. The Air Temperature Sensor (ATS) is built into the intake tube, which will allow for more precise and accurate readings; allowing your SR400 to run efficiently. You have the option to delete the EGR system, which will save weight (total of 6lbs) and simplify your SR400 for racing.\u003c\/p\u003e\r\n\u003cp\u003eMade in USA!\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Black","offer_id":40823386144827,"sku":"CH-1052-BLK","price":107.0,"currency_code":"USD","in_stock":false},{"title":"Polish","offer_id":40823386177595,"sku":"CH-1052-POL","price":107.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/files\/rr_steadygarage_jt33_th.jpg?v=1688083949"},{"product_id":"ruck-rack-luggage-rack-for-honda-ruckus-lowered-seat-frame","title":"Ruck Rack Luggage Rack for Honda Ruckus - Lowered Seat Frame","description":"\u003cp\u003eRuck Rack rear luggage rack for Honda Ruckus. The Ruck Rack is easy to install, will work with most OEM style lowered seat frames, such as ATR, NCY, PasswordJDM, etc, if you have these seat frames and you've shaved the stock tail light bracket, you could simply bolt on the Ruck Rack and go! The Ruck Rack has mounting tabs and brackets that will allow you to mount an integrated R6 taillight onto the rack, which will increase visibility.\u003c\/p\u003e\n\u003cp\u003eUnfortunately with so many different lowering seat frames available on the market, this rack cannot accommodate all. There will be instances where the OEM seat opening will not be able to flip up.\u003c\/p\u003e\n\u003cp\u003eRuck Rack is an easy to install luggage rack for the Honda Ruckus that will provide a location to strap and secure a load (bag, box, etc). This rack is meant for you to put stuff and to secure it down. The Ruck Rack has strap\/bungee hook pins that will allow you to easily tie things down. Powdercoated textured matte black, white, and red for a nice and durable finish!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e** Free Shipping does NOT apply to luggage racks**\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis LOWERED SEAT FRAME version will not work with the OEM stock seat frame because the rear mounting tabs are not flat (\u003ca href=\"https:\/\/www.steadygarage.com\/store\/ruck-rack-luggage-rack-for-honda-ruckus-stock-seat-frame\" target=\"_blank\"\u003eplease see the Stock Seat version\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eIt will NOT work with Chimera Lowered Seat Frames\u003c\/span\u003e because the seat hinge\/bracket is in the way and the seat will no longer open (it will fit if you remove the seat rear seat hinge and if you no longer want the seat to open). It Will work perfectly with OEM style lowered seat frames, such as; ATR, PasswordJDM, NCY, Bowls, etc).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in mounting tabs and brackets for optional R6 Taillight (R6 Taillight is not included)\u003c\/li\u003e\n\u003cli\u003eSupports up to 150lbs\u003c\/li\u003e\n\u003cli\u003eDesigned by an American veteran\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe size is approximately ~12\" W x 7.75\" Depth overall.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOptional Accessories:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003ePassenger Seat: Bolt on to the Ruck Rack with 3 bolts, available in Red or Black vinyl. 1.25\" thick medium-firm padding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003eRED vinyl color does NOT match OEM Honda Red seats. It's nearly impossible to find a 100% match to the OEM Red Ruckus seats.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cp\u003eTo use the R6 Tail light, you MUST cut off the welded on the original tail light bracket. This is REQUIRED to run the R6 light, otherwise, the light will make contact with the bracket.\u003c\/p\u003e\n\u003cp\u003eIf you would like to use the stock taillight and signal lights, then you must also purchase PN: \u003ca href=\"https:\/\/www.steadygarage.com\/store\/motodynamic-honda-ruckus-fender-eliminator\"\u003eMDH-1007\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cimg width=\"450\" height=\"auto\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/t\/9\/assets\/description_image_Ruck_Rack_V2_with_MD_tailtidy.jpg?v=1664291302\" alt=\"ruckrack\" title=\"ruckrack\" style=\"vertical-align: middle;\"\u003e\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Matte Black","offer_id":40823388209211,"sku":"RUCKRACK-MATTE","price":159.0,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":40823388274747,"sku":"RUCKRACK-WHT","price":159.0,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":40823388307515,"sku":"RUCKRACK-RED","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_dtt_102_th.jpg?v=1668646105"},{"product_id":"chimera-center-cap-for-4x110-douglas-rims","title":"Chimera Center Cap for 4x110 Douglas Rims","description":"Chimera center cap (1) for Douglas rims with a 4x110 bolt pattern! Having an opening right in middle of the rim is an eyesore! Pick up a Chimera center cap and it'll cap off your problems!\u003cbr\u003e\n\u003cp\u003eChimera center cap will work for any unmodified center bore dimension on Douglas\/DWT rims with 4x110 bolt patterns. It's perfectly machined for a very tight fit with a o-ring to help secure it in place! Machined from 6061 aluminum!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNote: Douglas center bore hole is not perfect since it's pressed\/punched from the factory, which may leave some additional material or high spots. Some filing\/deburring\/smoothing may be needed before the Chimera center cap could be installed. The Chimera center cap is a very perfect fit, which will\/may require a rubber mallot to knock the center cap in place.\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823389093947,"sku":"CH-1054","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_af14_th.jpg?v=1667783169"},{"product_id":"chimera-pacman-headlight-led-honda-ruckus","title":"Chimera Pac Man Baja Designs Squadron Sport LED Headlight for Honda Ruckus","description":"\u003cp\u003eChimera Pac Man Baja Designs Squadron Sport LED Headlight for Honda Ruckus\u003c\/p\u003e\n\u003cp\u003eOptional headlight hood is available. See dropdown menu.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eChimera Pac Man LED Headlight for Honda Ruckus. Headlight \u003cspan\u003eutilizes 4 Cree XP-G2 LEDs producing an impressive 1,800 lumens at 20 watts making it ideal for near field, side\/backup and scene lighting application. Not plug and play. You will need to rewire light to H4.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLumens:\u003c\/strong\u003e\u003cspan\u003e 1,800 Utilizing 4 Cree XP-G2 LEDs\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eWattage\/Amps:\u003c\/strong\u003e\u003cspan\u003e 20W \/ 1.4A\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eLED Life Expectancy:\u003c\/strong\u003e\u003cspan\u003e 49,930 Hours\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFront Lens:\u003c\/strong\u003e\u003cspan\u003e Hard Coated Polycarbonate\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eHousing: \u003c\/strong\u003e\u003cspan\u003ePowder Coated Cast Aluminum\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eExceeds MIL-STD810G (Mil-Spec Testing)\u003cbr\u003eBuilt-In Overvoltage Protection\u003cbr\u003eIK10 Compliant (Mechanical Impact Testing)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHeadlight bracket is Black Matte or RAW.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in U.S.A!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Black","offer_id":40823405248571,"sku":"CH-1056","price":180.0,"currency_code":"USD","in_stock":true},{"title":"Raw","offer_id":40823405281339,"sku":"CH-1056-RAW","price":175.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_otw41_th.jpg?v=1667281450"},{"product_id":"chimera-roadrunner-headlight-led-honda-ruckus","title":"Chimera Roadrunner LED Headlight for Honda Ruckus","description":"\u003cp\u003eChimera Roadrunner LED Headlight for Honda Ruckus\u003c\/p\u003e\r\n\u003cp\u003eChimera Roadrunner LED Headlight for Honda Ruckus. Headlight utilizes a pair of Baja Designs Squadron Sport light pods producing an impressive 1,800 lumens at 20 watts each light making it ideal for near field, side\/backup, and scene lighting application.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eLumens:\u003c\/strong\u003e 2x Baja Squadron Sports 1,800 Lumens, utilizing 4 Cree XP-G2 LEDs\u003cbr\u003e\u003cstrong\u003eWattage\/Amps:\u003c\/strong\u003e 20W \/ 1.4A each light\u003cbr\u003e\u003cstrong\u003eLED Life Expectancy:\u003c\/strong\u003e 49,930 Hours\u003cbr\u003e\u003cstrong\u003eFront Lens:\u003c\/strong\u003e Hard Coated Polycarbonate\u003cbr\u003e\u003cstrong\u003eHousing: \u003c\/strong\u003ePowder Coated Cast Aluminum\u003cbr\u003e\u003cstrong\u003eExceeds MIL-STD810G (Mil-Spec Testing)\u003cbr\u003eBuilt-In Overvoltage Protection\u003cbr\u003eIK10 Compliant (Mechanical Impact Testing)\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eKIT CONTENT:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eChimera Roadrunner LED Light Plate\u003c\/li\u003e\r\n\u003cli\u003e2x Baja Design Squadron Sport LED Lights\u003c\/li\u003e\r\n\u003cli\u003e2x Headlight Convertor Harness (allows you to connect the new LED headlight to the OEM Ruckus H4 headlight harness, wired for low beam)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eAvailable in Black or Raw finish (raw for those who want to paint or powder coat the light plate to match the color of their Ruckus).\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMade in U.S.A!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Black","offer_id":40823405314107,"sku":"CH-1057-BDSCombo-BLK","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_otw46_th.jpg?v=1667281533"},{"product_id":"chimera-cnc-clutch-plate-honda-grom-monkey-125-v2","title":"Chimera V2 CNC Clutch Lifter Plate - Honda Grom 125, Monkey 125 (2014-2020)","description":"\u003cp\u003eChimera Engineering V2 CNC clutch pressure plate is made from T-6061 aluminum! Chimera clutch plate is a direct replacement from the weak cast aluminum OEM unit that generally breaks when stiffer clutch springs are installed. The V2 version has been improved to handle up to 80% clutch springs! \u003cspan data-mce-fragment=\"1\"\u003ePerfect for all types of riding, from stunt, racing, to cruising!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eHighly recommended for those who are planning to run stiffer clutch springs, the increased spring rate will put more stress on the clutch plate tabs. It's not a question IF the weak OEM cast aluminum plate will break, but WHEN will it break. Replace the OEM unit with a Chimera one and ride worry free!\u003c\/p\u003e\n\u003cp\u003eThe Chimera V2 redesigned the clutch plate to hold the stiffest clutch springs available on the market! The V2 version is an update from the 2014 design.\u003c\/p\u003e\n\u003cp\u003eFitment:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHonda Grom 125 OG\/SF, JC61, JC75 4 speed (2014-2020)\u003c\/li\u003e\n\u003cli\u003eHonda Monkey 125, JB02 4 speed (2019-2020)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the USA.\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823418912827,"sku":"CH-1060","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steady_garage_ntt_28_th.jpg?v=1665372376"},{"product_id":"chimera-feign-ncy-rrgs-low-down-front-fork-lowering-kit-honda-ruckus-metropolitan","title":"Chimera FEIGN\/NCY\/RRGS ‘LOW DOWN’ FRONT FORK LOWERING KIT - Honda Ruckus Metropolitan","description":"\u003cp\u003eChimera FEIGN\/NCY\/RRGS ‘LOW DOWN’ FRONT FORK LOWERING KIT - Honda Ruckus Metropolitan\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003eWant to get more low out of your FEIGN\/NCY\/RRGS 'Low Down' front forks? With the low profile tires for the 12″ wheels that are available, or if you're running a 10″ wheel setup, then you probably have WAY too much gap between your tire and your triple tree! Fix it the quick, easy, effective way!\u003c\/p\u003e\n\u003cp\u003eThis kit will lower your forks 1.25″ while including stiffer springs.\u003c\/p\u003e\n\u003cp\u003eNote: Must be using low-profile front tire on 12″ wheel, or lower than stock profile on a 10″ wheel! Using normal stock-size tires will result in the tire hitting the Triple Tree!!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNOTE for RacingBros Anti Drive Kit - Honda Trail 125 (CT125) \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eThis kit will also work with RBROS-1060 as an helper spring. This kit will replace the long RacingBros Aluminum spacer entirely (included spacers + springs). This kit would allow additional suspension travel for the Racing Bros Front Anti Dive Kits for the Honda Trail 125 CT125.  \u003c\/div\u003e","brand":"CHIMERA ENGINEERING","offers":[{"title":"Default Title","offer_id":40823436869691,"sku":"CH-1413","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_jf56_th.jpg?v=1664293060"},{"product_id":"chimera-r2s2-led-headlight-honda-ruckus-pro","title":"Chimera R2S2 PRO LED Headlight for Honda Ruckus","description":"\u003cp\u003eThe Chimera R2S2 PRO LED Light offers an incredible 2,150 lumens out of a tiny 3” x 2” housing; the R2S2 is quite literally the brightest LED light ounce for ounce on the market. The R2S2 is mounted where the horn would reside in the battery box.  Moreover, it only draws 21 watts so your electrical system will barely know it’s there.  This LED is perfect for all your adventures!\u003c\/p\u003e\u003cp\u003eThe Chimera R2S2 LED headlight is mounted where the horn location of the battery box so modification is necessary to your box and the horn will need to be relocated.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eChimera R2S2 PRO Driving\/Combo LED Headlight for Honda Ruckus in Black or White. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eLumens:\u003c\/strong\u003e 2,150 Utilizing 2 Cree XM-L2 LEDs\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eWattage\/Amps:\u003c\/strong\u003e 21W \/ 1.75A\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.93\" x 1.76\" x 1.68\"\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 8 ounces\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eLED Life Expectancy:\u003c\/strong\u003e 49,930 Hours\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFront Lens:\u003c\/strong\u003e Hard Coated Polycarbonate\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e Hard Anodized \u0026amp; Powder Coated Cast Aluminum\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBezel: \u003c\/strong\u003eBillet Machined Aluminum\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eHardware \u0026amp; Bracket Material:\u003c\/strong\u003e Stainless Steel\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eExceeds MIL-STD810G (Mil-Spec Testing)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBuilt-In Overvoltage Protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eIP69K (Waterproof up to 9ft \u0026amp; Pressure Washable)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eIK10 Compliant (Mechanical Impact Testing)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eDriving\/Combo:\u003c\/strong\u003e  Maximum street coverage in a single light.  The Driving\/Combo pattern is equipped with both Driving (10°) and spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade in U.S.A!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Black","offer_id":40823440834619,"sku":"CH-1064-BLK","price":200.0,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":40823440867387,"sku":"CH-1064-WHT","price":210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_fe_27_th.jpg?v=1667281478"},{"product_id":"chimera-b2v-led-replacement-headlight-honda-grom-ruckus","title":"Chimera B2V LED Replacement Headlight for Honda Ruckus","description":"\u003cp\u003eThe Honda Ruckus has the most unique and timeless headlight design for a scooter! Upgrade to the the brightest and the LED light pod there is, Baja Designs! Get a nice and unique look while maintaining the Ruckus original headlight set up.\u003c\/p\u003e\n\u003cp\u003eHeadlight Sold Individually with Black Bezel!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #4d63ef;\"\u003e\u003ca style=\"color: #4d63ef;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/t\/9\/assets\/description_image_steadygarage_chimerab2vheadlightRuckus.pdf?v=1664293161\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cstrong\u003eChimera B2v LED Replacement Headlight Installation Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eChimera B2V Driving Combo LED Replacement Headlight for Honda Ruckus\u003c\/p\u003e\n\u003cp\u003eContent:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1xBaja Designs XLSport LED Pod Light\u003c\/li\u003e\n\u003cli\u003e1x Chimera Ruckus B2V light conversion plate\u003c\/li\u003e\n\u003cli\u003e1x Flat Bolt and Nut\u003c\/li\u003e\n\u003cli\u003e2x Mounting hardware for conversion plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eHeadlight Specifications:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eLumens:\u003c\/strong\u003e 1,800 Utilizing 4 Cree XP-G2 LEDs\u003cbr\u003e\u003cstrong\u003eWattage\/Amps:\u003c\/strong\u003e 20W \/ 1.4A\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.43\" x 3.65\" x 4.43\"\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.45 lbs\u003cbr\u003e\u003cstrong\u003eLED Life Expectancy:\u003c\/strong\u003e 49,930 Hours\u003cbr\u003e\u003cstrong\u003eFront Lens:\u003c\/strong\u003e Hard Coated Polycarbonate\u003cbr\u003e\u003cstrong\u003eHousing: \u003c\/strong\u003ePowder Coated Cast Aluminum\u003cbr\u003e\u003cstrong\u003eBezel: \u003c\/strong\u003eBillet Machined Aluminum\u003cbr\u003e\u003cstrong\u003eHardware \u0026amp; Bracket Material:\u003c\/strong\u003e Stainless Steel\u003cbr\u003e\u003cstrong\u003eExceeds MIL-STD810G (Mil-Spec Testing)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eBuilt-In Overvoltage Protection\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eIP69K (Waterproof, Submersible to 9ft)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eIK10 Compliant (Mechanical Impact Testing)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDriving\/Combo: Maximum trail coverage in a single light. The Driving\/Combo pattern is equipped with both Wide Driving (44) and spot (6) optics to provide you with a smooth blend of light for both near field applications and distance\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/t\/9\/assets\/description_image_steadygarage_chimerab2vheadlightRuckus.pdf?v=1664293161\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cstrong\u003eChimera B2v LED Replacement Headlight Installation Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eINSTALLATION NOTES: Due to the size of this LED light heavy modification to the Ruckus Headlight Bracket is need to mount this light. Grinding off of the nut on the headlight bracket is necessary. Clinching bolt is included. Minor work is also needed to mount the Ruckus headlight ring to the triple tree or Honda Grom.\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823440998459,"sku":"CH-1061","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_fe_38_th.jpg?v=1667281369"},{"product_id":"chimera-thumb-screw-idle-adjuster-with-spring-for-honda-grom-125-kawasaki-z125","title":"Chimera Thumb Screw Idle Adjuster with Spring for Honda Grom 125 Kawasaki Z125","description":"\u003cp\u003eChimera Thumb Screw Idle Adjuster with Spring for Honda Grom 125 or Kawasaki Z125.\u003c\/p\u003e\n\u003cp\u003eIdle adjustment made easier for all those Honda Grom or Kawasaki Z 125 stunt riders or those who want to dial in their big bore engines. You now can adjust your idle without any tools. Simply replace screw and nut from your throttlebody and install thumb screw and spring. You will also need to remove the plastic cover.\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823441391675,"sku":"CH-1067","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_fe_49th_1.jpg?v=1667768365"},{"product_id":"chimera-84-extended-stage-6-slide-carburetor-throttle-cable-honda-ruckus-metropolitan","title":"Chimera 84\" Extended Stage 6 Slide Carburetor Throttle Cable Honda Ruckus Metropolitan","description":"Chimera Stage 6 84\" Extended throttle cable.  Ideal for those who are extending the engine on Honda Ruckus or Honda Metropolitan. Chimera  throttle cable will also work with other motorcycles or scooters that has the same Stage 6  throttle control unit and tube.\u003cbr\u003e\u003cp\u003eChimera Stage 6 slide carburetor throttle cable are approximately 84\" long. Slack adjusters were added on carb end to make this the perfect throttle cable for any type of carburetor set up and bikes.\u003c\/p\u003e\u003cp\u003eMade in USA.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eCustom length and size are available. Please contact us for prices.\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823444242491,"sku":"CH-1068","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_mt2_th_1.jpg?v=1666766831"},{"product_id":"chimera-flat-light-bracket-triple-tree-headlight-honda-ruckus","title":"Chimera Flat Light Bracket for Honda Ruckus Triple Tree","description":"Chimera Flat Light Bracket for Honda Ruckus Triple Tree - Matte Black\u003cbr\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823451385915,"sku":"CH-1077","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_ae_22_th.jpg?v=1664293638"},{"product_id":"chimera-m24-ruckus-fork-adapters-kawasaki-z125-pro","title":"Chimera M24 Ruckus Fork Adapters Kawasaki Z125 Pro","description":"Chimera M24 Ruckus Front Fork Adapter for Kawasaki Z125 Pro! This adapter kit will allow you to convert and run any Ruckus front forks, from RRGS, NCY, Feign, etc. To lower the Z125 Pro for that slammed look! Be sure to also purchase the Rear Low Stance shock as well! Available in two different lengths, Super Slam and Low (3\/4\" taller)!\u003cbr\u003e\u003cbr\u003eOrange Z125 Pro set up:\u003cbr\u003eChimera Extension Blocks\u003cbr\u003eChimera M24 Fork Adapters - Super Slam\u003cbr\u003eNCY Ruckus Front Fork (Regular non-slammed version, see related products)\u003cbr\u003eCustom ATR Low Stance Ruckus Rear Shock (7.75\" length)\u003cbr\u003e\u003cp\u003e\u003cspan\u003e***Warning: This setup WILL require a decent amount of modification, and because of the wide variety of forks on the market, it will require that custom axle spacers and caliper spacers to align everything! Even though it does \"bolt in\", this setup does require a decent level of skill to install. If you don't know anything about making spacers, please take it to someone who does for the installation!*** \u003c\/span\u003e\u003cspan\u003eWhat is included?   Included in this setup are the two SOLID Billet 6061-T6 Aluminum Fork adapters. These are designed to install in place of the stock forks, and then allow you to slide a Honda Ruckus\/Zoomer fork into the lower end of the adapter, and clamp it just like you would on a scooter.       \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eWhat considerations are there for installing this? \u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIf you use a fork such as an RRGS or NCY \"low down\" fork, your stock headlight WILL NOT FIT! You will need to do something custom for a headlight. We recommend the longer Ruckus front forks (non-low downs)\u003c\/li\u003e\n\u003cli\u003eAlso, the front of the bike will be VERY low, and if you combine that with the rear lowered shock to get a leveled stance. You WILL need to cut the stock kickstand to shorten them, or the bike will not be able to lean without hitting on the left side. \u003c\/li\u003e\n\u003cli\u003eAnother thing to consider is the header\/muffler height. Since the Z125 Pro has an undermount exhaust system, ground clearance is a huge issue! A custom exhaust may be required for this setup, or heavily modifying an off-the-shelf header may need to be done. \u003c\/li\u003e\n\u003cli\u003eIf you run a longer front fork, like the regular NCY, or long RRGS Ruckus forks, you will have much better clearance, but the bike won't be nearly as low. Also, you will be able to run the stock headlight with a longer fork setup. \u003c\/li\u003e\n\u003cli\u003eDue to using forks from a Ruckus, the Z125 Pro front fender will no longer used since the Ruckus fork doesn't have the same mounting tabs. Custom fender brackets will need to be made if you would like to run the stock Fender.\u003c\/li\u003e\n\u003cli\u003eYou will want to run a stiffer rear shock, or add pre-load... this will give you better ground clearance while riding the bike.\u003c\/li\u003e\n\u003cli\u003eYou WILL have to flip the wheel around so the rotor is on the other side of the bike from stock, which will also mean you will need to flip the tire on the wheel before going back out for a ride so the tire is rolling the proper direction!\u003c\/li\u003e\n\u003cli\u003eDO NOT use forks from overseas that locate the axle BEHIND the centerline of the fork... if you do, the tire will hit the cylinder head... some forks extend the axle to the front side of the fork, and these would be ok, but you will be changing the rake of the bike, and it will handle differently. \u003c\/li\u003e\n\u003cli\u003eMax depending on what fork or length of Potato Smasher you decide to use, the largest front tire you could run is a 110\/70-12. For super slammed set ups, you will be require to run 100\/60-12.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003e      THESE ADAPTERS ARE NOT FOR EVERYONE! If you enjoy popping wheelies, stunting, dragging knee in corners, etc... don't bother with this setup... If you are looking for simple bolt-on, this setup is not for you... there is a fair bit of \"figuring\" that you will need to do to get this setup to work on your bike!  \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Super Slam","offer_id":40823451615291,"sku":"CH-1070-Super Slam","price":84.0,"currency_code":"USD","in_stock":true},{"title":"Low","offer_id":40823451648059,"sku":"CH-1070-Low","price":84.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_mn76_th-s.jpg?v=1667775130"},{"product_id":"chimera-get-engine-high-rise-stainless-steel-header","title":"Chimera GET Engine High Rise Stainless Steel Header","description":"\u003cul\u003e\u003cli\u003eNOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eChimera GET High Rise overhead header for 2002-2022 Honda Ruckus NPS50, 1st generation 2002-2012 Honda Metropolitan CHF50! Will work with fatty or non-fatty rear wheel set up!\u003c\/p\u003e\u003cp\u003eRaw stainless steel finish (NOT POLISH). \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cspan\u003eChimera GET High Rise full stainless steel header.  The Chimera High Rise header series is designed to provide the most ground clearance possible, ideal for lowered\/stance bikes! Stepped design, 1\" primary tubing that is stepped up to 1-3\/8\" o.d. with a little bit of extra tubing so that you could cut it to your desired length, which allows you to slip fit, fabricate, or weld a muffler to it. Tight fitment is key to the overall appearance of the header, hugging the engine and dodging the plastic covers. Match up this header with your desired muffler and get the performance, sound, and style that you're looking for! Since the flange is pivotable, it will work with either fatty and non-fatty rear wheel set up, this allows you to have nice and tight fitment over other headers available on the market. \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cbr\u003eRAW Stainless Steel Finish (NOT POLISH)\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMade in USA.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eWill fit any GET Honda 50cc engines, which is most commonly found on first-gen Honda Ruckus and Honda Metropolitans. \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eNote: No muffler or exhaust hanger is included. Custom exhaust hanger is required, if you do not know how to make one or anyone who makes one, please contact us! We could make a custom exhaust hanger for an additional cost. If you would like to run open header, support bracket MUST be made in to support the header. If no support is made, the header will crack as it's only being held up with the two flange bolt. \u003c\/p\u003e\u003cp\u003e For Honda Metropolitan, depending on your ride height and muffler size, it may come close to the body panels.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis product is NOT legal for sale, installation, or use on a pollution-controlled vehicle in the state of California. This product is NOT CARB legal. Legal only for racing vehicles in closed course competitions which will never be driven on a public right of way.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThis product is legal for closed-course competition use only; for racing vehicles (a competition vehicle not used on public highways). Intended for off-road use or race purposes; does not meet regulations of pollution-controlled roads or highways.  \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823452893243,"sku":"CH-1059","price":118.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_mn11_th_1.jpg?v=1667150069"},{"product_id":"chimera-adjustable-stretch-extension-blocks-kawasaki-z125-pro","title":"Chimera Adjustable Stretch Extension Blocks Kawasaki Z125 Pro","description":"\u003cp\u003eChimera Adjustable Stretch Blocks will allow you to easily stretch your Kawasaki Z125 Pro! Easy to install! Simply slide it into the end of the OEM swing arm and bolt it to your desire length! Fully machined from T-6061 aluminum! Features built in caliper bracket stopper and stainless steel hardware!\u003c\/p\u003e\n\u003cp\u003eStretch length could be adjusted from 4\" to 6.5\" (+\/- 1\/2\" depending on chain tension)\u003c\/p\u003e\n\u003cp\u003eHard anodized black for a durable and long lasting finish. Made in the USA!\u003c\/p\u003e\n\u003cp\u003eKIT CONTENT:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLeft\/Right Stretch Blocks\u003c\/li\u003e\n\u003cli\u003e2x Chain Adjuster Blocks\u003c\/li\u003e\n\u003cli\u003e2x Pitch Blocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNOTE:\u003c\/p\u003e\n\u003cp\u003eLonger chain will be needed!! Depending on how long you want to position the stretch blocks, you may need a chain length from 130L - 134L. We recommend the 134L length, so you have more chain to adjust according to the stretch you want. Remember to also purchase a \u003cspan style=\"text-decoration: underline; color: rgb(43, 0, 255);\"\u003e\u003ca style=\"color: rgb(43, 0, 255); text-decoration: underline;\" href=\"https:\/\/www.steadygarage.com\/store\/motion-pro-chain-breaker-tool\" target=\"_blank\"\u003eMotion Pro Chain Breaker Tool\u003c\/a\u003e \u003c\/span\u003eto adjust the length of the chain.\u003c\/p\u003e\n\u003cp\u003eFor extensions up to ~6 inches, the factory brake line can be retained through strategic rerouting. By running the line straight back from the master cylinder rather than following the original forward-looping path, you use the stock length lines for the stretch block installation without the need for an extended line.\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Black","offer_id":40823453253691,"sku":"CH-1072-BLK","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_ntf_174_th.jpg?v=1682210030"},{"product_id":"chimera-silicone-cold-air-intake-big-bore-throttle-body-honda-grom","title":"Chimera S Cold Air Intake for Big Bore Throttle Body Honda Grom 125 (2014-2020)","description":"\u003cp\u003eChimera S Cold Air Intake for Big Bore Throttle Body\u003c\/p\u003e\n\u003cp\u003eThe only intake designed for the Bigger throttle bodies available for the Honda Grom 125. The Silicone intake brings something unique and colorful to match the color theme of your bike or to dress up the engine with details! Available in various solid and camo colors!\u003c\/p\u003e\n\u003cp\u003ePlease select from color options!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolid Colors: Black, Blue, Gray, Red, Tiffany\u003c\/li\u003e\n\u003cli\u003eCamo: American (Red, White, Blue, Light-Gray)\u003c\/li\u003e\n\u003cli\u003eUrban (Light Gray, Dark Gray, White, Black)\u003c\/li\u003e\n\u003cli\u003eStreet (Red, Light-Gray, Dark-Gray, White)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eChimera Engineering S Cold Air Intake for Big Bore Throttle Body. Silicone air intake designed for the Honda Grom 125 owner who upgraded to the bigger Koso or Takegawa throttle body.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eChimera Engineering S Cold Air intake is positioned to allow a more direct, cooler and fresher air into your engine, giving you better throttle response and better performance. Increase airflow and at the same time, get a nice deep throaty intake sound while you cruise around!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChimera Short Ram Intake kit ONLY INCLUDES THE FOLLOWING ITEMS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChimera S Cold Air Silicone Intake Pipe for Honda Grom (2014-2020)\u003c\/li\u003e\n\u003cli\u003e3 Ply Silicone Intake Coupler\u003c\/li\u003e\n\u003cli\u003e2x Hose Clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOPTIONAL ITEMS *PLEASE SELECT FROM THE PRODUCT ADDON BOXES TO COMPLETE THE SYSTEM*:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChimera Universal CH-1307 Cone Air Filter\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eK\u0026amp;N Universal RC-1060 Chrome Air Filter\u003c\/li\u003e\n\u003cli\u003eSprint Filter Universal Water Proof Air Filter\u003c\/li\u003e\n\u003cli\u003ePre-Charger Wraps for the selected air filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eOPTIONAL K\u0026amp;N Pre-charger (see drop-down menu): for those that want to keep their K\u0026amp;N or Chimera air filters in tip-top condition! The K\u0026amp;N PreCharger is a specially designed filter wrap made to extend the service interval of your K\u0026amp;N Filter when used in very dusty conditions. They are made from durable polyester material containing uniform micron openings. The PreCharger will stop small dirt particles; yet add little restriction to the airflow of the filter. The PreCharger is designed to be run dry and can be cleaned with K\u0026amp;N Filter Cleaner.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eNote: When installing the short ram intake, make sure the battery is unplugged. This will allow the ECU to reset the existing parameter and refresh itself to the new change. Like any aftermarket air intake system for the automotive and power sports industry, not recommended to be used in rain.\u003c\/p\u003e\n\u003cp\u003eSprint Filter Waterproof Air Filter Option: Sprint air filter overall size is a lot larger than the K\u0026amp;N air filter. Since the Sprint Filter is taller than the K\u0026amp;N air filter, depending on your intake placement, the filter may come into contact with the forks at MAX right turn. More than likely, you will never turn to full LOCK while riding, this shouldn't be an issue during riding. The silicone intake tube can also be shorted to accommodate the Sprint Filter if desired.\u003c\/p\u003e\n\u003cp\u003eNOTE: The S version of the Chimera intake does not have a location for the IAT sensor. The IAT sensor could be zip tied some where on the outside by the air filter OR put into the breather fitting with a little bit of a fuel hose to fill the void for those who are running a oil catch can.\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Black","offer_id":40823457153083,"sku":"CH-1069-BLK","price":89.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":40823457185851,"sku":"CH-1069-BLUE","price":89.99,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":40823457218619,"sku":"CH-1069-GREY","price":89.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":40823457251387,"sku":"CH-1069-RED","price":89.99,"currency_code":"USD","in_stock":true},{"title":"Tiffany","offer_id":40823457284155,"sku":"CH-1069-Tiffany","price":89.99,"currency_code":"USD","in_stock":false},{"title":"American CAMO","offer_id":40823457316923,"sku":"CH-1069-American CAMO","price":89.99,"currency_code":"USD","in_stock":false},{"title":"Street CAMO","offer_id":40823457349691,"sku":"CH-1069-Street CAMO","price":89.99,"currency_code":"USD","in_stock":false},{"title":"Urban CAMO","offer_id":40823457382459,"sku":"CH-1069-Urban CAMO","price":89.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_jf_15.jpg?v=1664293994"},{"product_id":"chimera-integrated-led-tail-light-kit-honda-ruckus","title":"Chimera Integrated LED Tail Light Kit Honda Ruckus","description":"Chimera LED Tail Light kit for Honda Ruckus! Directly mount this under your Ruckus seat! Ready to install, completely plug and play!\u003cbr\u003e\u003cp\u003eChimera LED Tail Light Kit for Honda Ruckus! Direct plug and play, includes everything you need to mount this tail light kit under the seat! \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eNote:\u003c\/p\u003e\u003cul\u003e\r\n\u003cli\u003eTrimming the large hoop tab under the seat is required in order for the bracket it fit. \u003c\/li\u003e\r\n\u003cli\u003e LED flasher relay is highly recommended for easier installation (PN: ETC-12VLF, sold separately, minor wiring is required for flasher relay installation)\u003c\/li\u003e\r\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eKit Content:\u003c\/p\u003e\u003cul\u003e\r\n\u003cli\u003eUltra bright LED integrated tail light, plug and play ready!\u003c\/li\u003e\r\n\u003cli\u003eChimera Mounting Bracket\u003c\/li\u003e\r\n\u003cli\u003eMounting hardwares\u003c\/li\u003e\r\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eTail Light Features:\u003c\/p\u003e\u003cul\u003e\r\n\u003cli\u003e36 ultra bright dual mode red\/yellow SMD LEDs for running\/brake lights and turn signals\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eNEW! Programmable features:\u003c\/strong\u003e\u003cul\u003e\r\n\u003cli\u003eON\/OFF Stop Alert\u003c\/li\u003e\r\n\u003cli\u003eON\/OFF Sequential signals\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eDirect plug and play with bullet connectors already crimped on\u003c\/li\u003e\r\n\u003cli\u003eResistors\u003c\/li\u003e\r\n\u003cli\u003eStop Alert - utilizes 3 quick red flashes when brakes are applied initially\u003c\/li\u003e\r\n\u003cli\u003eSequential alternating yellow LED turn signals\u003c\/li\u003e\r\n\u003cli\u003eStreet Legal: N\/A\u003c\/li\u003e\r\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\r\n\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eDesigned with Stop Alert function added to increase motorist awareness when you are braking. Sequential LEDs flash in sequence in the direction you are turning or merging so there is no confusion which way you are going.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eA microprocessor is use with an integrated circuit chip (IC) to control all the functions of park, brake, and sequential signals. All IC chips are micro soldered by machine to deliver consistent and reliable solder points.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Clear","offer_id":40823458365499,"sku":"CH-1075-CLR","price":109.99,"currency_code":"USD","in_stock":true},{"title":"Smoked","offer_id":40823458398267,"sku":"CH-1075-SMK","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_mt42_th.jpg?v=1667281433"},{"product_id":"chimera-p34-p32-brembo-caliper-bracket-honda-ruckus-200mm-rotor-kawasaki-z125-pro","title":"Chimera Front Caliper Bracket for Brembo P32\/P34 with 200mm Rotor for Feign RRGS NCY Forks","description":"\u003cp\u003eChimera front brake caliper bracket for Honda Ruckus RRGS Feign NCY Forks. Will accept Brembo P32\/P34 calipers with 200mm front rotor. Perfect for the lowering of the Kawasaki Z125 Pro.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eAvailable in Raw or Hard Anodized Black\u003c\/p\u003e\u003cbr\u003eChimera front caliper bracket will allow you to mount a Brembo P32\/P34 caliper to the front of your Feign, NCY or RRGS Forks with 200mm caliper. Perfect for those running ruckus style forks on the Kawasaki Z125 Pro.","brand":"Chimera Engineering","offers":[{"title":"Black","offer_id":40823474028603,"sku":"CH-1076-BLK","price":70.0,"currency_code":"USD","in_stock":true},{"title":"Raw","offer_id":40823474061371,"sku":"CH-1076-RAW","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_jf_133_th.jpg?v=1664294389"},{"product_id":"chimera-m24-ruckus-fork-adapters-honda-grom-125","title":"Chimera M24 Ruckus Fork Adapters - Honda Grom 125","description":"\u003cp\u003eChimera M24 Ruckus Front Fork Adapter for Honda Grom 125! This adapter kit will allow you to convert and run any Ruckus front forks, from RRGS, NCY, Feign, etc. To lower the Grom for that slammed look! \u003c\/p\u003e\u003cp\u003eAvailable in Raw or Hard Anodized Black\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e***Warning: This setup WILL require a decent amount of modification, and because of the wide variety of forks on the market, it will require that custom axle spacers and caliper spacers to align everything! Even though it does \"bolt in\", this setup does require a decent level of skill to install. If you don't know anything about making spacers, please take it to someone who does for the installation!*** What is included?   Included in this setup are the two SOLID Billet 6061-T6 Aluminum Fork adapters. These are designed to install in place of the stock forks, and then allow you to slide a Honda Ruckus\/Zoomer fork into the lower end of the adapter, and clamp it just like you would on a scooter.      \u003c\/p\u003e\u003cp\u003eWhat considerations are there for installing this? \u003c\/p\u003e\u003cul\u003e\r\n\u003cli\u003eIf you use a fork such as an RRGS or NCY \"low down\" fork, your stock headlight WILL NOT FIT! You will need to do something custom for a headlight. We recommend the longer Ruckus front forks (non-low downs)\u003c\/li\u003e\r\n\u003cli\u003eAlso, the front of the bike will be VERY low, and if you combine that with the rear lowered shock to get a leveled stance. You WILL need to cut the stock kickstand to shorten them, or the bike will not be able to lean without hitting on the left side. \u003c\/li\u003e\r\n\u003cli\u003eAnother thing to consider is the header\/muffler height. Ground clearance can be a issue! A custom exhaust may be required for this setup, or heavily modifying an off-the-shelf header may need to be done. \u003c\/li\u003e\r\n\u003cli\u003eIf you run a longer front fork, like the regular NCY, or long RRGS Ruckus forks, you will have much better clearance, but the bike won't be nearly as low. Also, you will be able to run the stock headlight with a longer fork setup. \u003c\/li\u003e\r\n\u003cli\u003eDue to using forks from a Ruckus, the Grom front fender will no longer used since the Ruckus fork doesn't have the same mounting tabs. Custom fender brackets will need to be made if you would like to run the stock Fender.\u003c\/li\u003e\r\n\u003cli\u003eYou will want to run a stiffer rear shock, or add pre-load... this will give you better ground clearance while riding the bike.\u003c\/li\u003e\r\n\u003cli\u003eYou WILL have to flip the wheel around so the rotor is on the other side of the bike from stock, which will also mean you will need to flip the tire on the wheel before going back out for a ride so the tire is rolling the proper direction!\u003c\/li\u003e\r\n\u003cli\u003eDO NOT use forks from overseas that locate the axle BEHIND the centerline of the fork... if you do, the tire will hit the cylinder head... some forks extend the axle to the front side of the fork, and these would be ok, but you will be changing the rake of the bike, and it will handle differently. \u003c\/li\u003e\r\n\u003cli\u003eMax depending on what fork you decide to use, the largest front tire you could run is a 110\/70-12. For super slammed set ups, you will be require to run 100\/60-12.\u003c\/li\u003e\r\n\u003c\/ul\u003e\u003cp\u003e      THESE ADAPTERS ARE NOT FOR EVERYONE! If you enjoy popping wheelies, stunting, dragging knee in corners, etc... don't bother with this setup... If you are looking for simple bolt-on, this setup is not for you... there is a fair bit of \"figuring\" that you will need to do to get this setup to work on your bike!   \u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Black","offer_id":40823486873659,"sku":"CH-1078-BLK","price":104.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":40823486906427,"sku":"CH-1078-SIL","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_af_20_th.jpg?v=1667775115"},{"product_id":"chimera-pro-header-kawasaki-z125","title":"Chimera Pro Header for Kawasaki Z125","description":"\u003cp\u003eChimera Engineering Pro Header for Kawasaki Z125 Pro! Chimera Pro Header was designed to provide great ground clearance, simple routing, and free-flowing sound and performance! With this header, modify and mount the muffler of your choice! Customize it to your style!\u003c\/p\u003e\n\u003cp\u003eChimera Engineering Pro header for the Kawasaki Z125 Pro is fully TIG welded with 304 stainless steel material! Primary tubing size is 1\", which is stepped up to 1-1\/4\"\/1.25\" all the way to the end of the header. The header pipe is made slightly longer so you could cut it down to exactly where you want to position your muffler. You could also step the header up to whatever size inlet that your muffler may have. Includes welded o2 bung for factory o2 sensors. Polished for the final finish!\u003c\/p\u003e\n\u003cp\u003eContent:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003e1x Chimera Engineering Pro Header\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003e1x Mounting Spacer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003e1x Stainless Steel Socket Cap Screw\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003e1x Nylon Nut\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesigned and made in the USA!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLike with any other headers on the market, it's not meant to be used by itself! If you want to run an open header, it's REQUIRED to have a hanger or a bracket to support the header with the engine. Without the proper supporting bracket, the header WILL BREAK at the flange, this would happen to any and all header that doesn't have a support bracket at the end of the header or exhaust. Proper muffler support bracket is also required. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823491035195,"sku":"CH-1079","price":95.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_js_47_th.jpg?v=1667150144"},{"product_id":"chimera-3-5-front-adapter-for-yamaha-zuma-125-brake-rotor-monkey-hub-honda-ruckus","title":"Chimera 3 to 5 Bolts Rotor Adapter for Yamaha Zuma 125 Brake Rotor - Classic Monkey Hub","description":"\u003cp\u003eChimera 3 to 5 bolt rotor conversion adapter for Classic Monkey front hub. Ideal for those who would like to run a large brake rotor for their custom Honda Ruckus, or for those who would like to run an aftermarket front rim on their custom Yamaha Zuma 125.\u003cbr\u003eChimera 3-5 conversion adapter will convert the small 3 hole rotor pattern on Classic Monkey front hubs to the Zuma 125 5-hole disc brake rotor. Direct bolt on for Classic Monkey Front Hubs that will allow you to run large Yamaha Zuma 125 260mm rotors onto your Ruckus (be ready to modify parts and potential fitment issues may occur depending on your combining front end set up.)\u003c\/p\u003e\n\u003cp\u003eMade in the USA!\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823502209083,"sku":"CH-1081","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_aft_32_th.jpg?v=1664294742"},{"product_id":"chimera-honda-ruckus-metropolitan-magic-spacer-zuma-qmb139-conversion","title":"Chimera \"Magic\" Spacer for Honda Ruckus Dr. Pulley Clutch Conversion","description":"\u003cp\u003eChimera \"Magic\" Spacer for Honda Ruckus clutch conversions, such as using clutches from a Yamaha Zuma 50, the Dr. Pulley Hit Clutch Kit, or the QMB139 GY6 50cc clutch assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhen converting the rear Ruckus contra pulley to the Yamaha Zuma 50 or QMB139 pulley, a spacer is needed to keep the pulley from rubbing on the Ruckus swing arm case. This spacer will slide over the clutch shaft and sits on the first step \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCNC machined for precision fit from stainless steel! Proudly made in the U.S.A!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823510597691,"sku":"CH-1083","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_aft_60_th.jpg?v=1664294902"},{"product_id":"adjustable-led-flasher-relay-12v-2-prongs-kawasaki-z125-pro","title":"Chimera Plug and Play Adjustable Flasher Relay for Kawasaki Z125","description":"A must have for those converting to LED turn signal lights on the Kawasaki Z125 Pro. Plug and play harness included. Adjustable unit which allows you to control the rate in which your blinkers flash.. Will work with both LED lights and standard light bulbs.\u003cbr\u003e\n\u003cp\u003eSimple Adjustable 12v LED turn signal flasher relay for Kawasaki Z125 Pro. Plug and Play harness included. Simply Unplug your \u003cstrong\u003eleft hand control\u003c\/strong\u003e and plug the relay in line with the left hand control.\u003c\/p\u003e\n\u003cp\u003eThe adjustable flasher relay will give you the control on how fast your signals blink, however, the Z125 Pro turn signals are linked up with the ECU. The ECU is very sensitive when there is a resistance variance. For most part, the additional relay would work out the slight variances, however with so many types and brands of lights out there, not all of them are equal (some lights have 3 LED, some has 6 LED, etc). The flasher relay may or may not require the use of resistors (it depends on the turn signal light).\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823511351355,"sku":"CH-1084","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_aft_76_th.jpg?v=1664294913"},{"product_id":"chimera-dry-break-receiver-weld-on-flange","title":"Chimera Dry Break Receiver Weld On Flange - Light Weight","description":"\u003cp\u003eChimera Dry Break Receiver Weld-On Flange! Will fit the most common single dry break female receivers on the market, such as IMS, Clarke, and RedHead. Customize an OEM gas tank or build your own, weld this flange on there and bolt on a Dry Break receiver to reduce refill times! Dry Break fuel system will refill a 4-gallon gas tank within seconds! Stop fiddling around with unscrewing or unlocking your gas cap during a race, speed up pit-stops with a dry break!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThere are many benefits to retrofit the gas tank on your race vehicle to use a Dry Break system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003eSafety: Refueling is much safer because it reduces the chances of spillage. Once the dump can is closed, it's sealed.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003eSpeed: It'll take roughly 7 seconds to refuel a 4-gallon gas tank, there is no need to fiddle around with unscrewing or unlocking gas caps. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWeight matters for racing, these are super light weight! Made from .138\" thick mild steel (slightly thicker than 1\/8\"). \u003c\/p\u003e\n\u003cp\u003eIncludes (9x) M5x0.8mm flat screws (countersunk)\u003c\/p\u003e\n\u003cp\u003eMade in the USA!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eNote: Professional installation is required. Other components such as dump can and male probe are all sold separately. Gas tank customization and modification service is available, please contact us for information.\u003c\/span\u003e\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823517347899,"sku":"CH-1086","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_aft_82_th.jpg?v=1664294959"},{"product_id":"chimera-block-off-plate-linhai-vog-250cc-yamaha-majesty-250cc-engine","title":"Chimera Block Off Plate for Linhai VOG 250cc Yamaha Majesty 250cc Engine","description":"Chimera Block Off Plate for Linhai VOG 250cc, Yamaha Majesty 250cc Engine\u003cbr\u003e\u003cbr\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823540121659,"sku":"CH-1091","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steady_garage_ns46_th_1.jpg?v=1667088387"},{"product_id":"chimera-engineering-oil-cooler-sandwich-adapter-plate-kawasaki-z125-pro","title":"Chimera Oil Cooler Sandwich Plate for Kawasaki Z125","description":"\u003cp\u003eChimera Engineering Oil Cooler Sandwich Plate for the Kawasaki Z125 Pro!  Now you can add a custom oil cooler to your Z125. Oil cooler is recommended to all those that run a big bore kit.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eChimera Engineering Oil Cooler Sandwich Plate for the Kawasaki Z125 Pro. Sandwich plate goes between the factory oil filter location. All that is needed is an oil cooler of your choice, fittings and lines. Also fits the Kawasaki KLX110 KSR110 bikes.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eContent:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003e1 x Chimera Engineering Sandwich Plate with 1\/8\" NPT Ports\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003e2 x Longer Screws\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eDesigned and made in the USA!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823541137467,"sku":"CH-1088","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_os_67_th.jpg?v=1667089589"},{"product_id":"chimera-upgraded-cam-chain-tensioner-button-honda-grom-msx-125","title":"Chimera Upgraded Cam Chain Tensioner Button - Honda Grom, Monkey 125 (ALL YEARS)","description":"Chimera upgraded Cam Chain Tensioner Button is meant to outlast and out perform the OEM Rubber tensioner rod Button. Common problem is that the OEM Rubber button is known to quickly wear-out or breaks down, causing the timing chain to lose tension and potentially jumping tooth which may lead to engine failure. To make sure this doesn't happen to you, upgrade your cam chain tensioner button as soon as possible, even on OEM engines!\u003cbr\u003e\r\n\u003cp\u003ePrevents premature failure and possible major damage to engine and timing components.\u003c\/p\u003e\r\n\u003cp\u003e聽\u003c\/p\u003e\r\n\u003cp\u003eProlong the life of your current or future BBK with this new Chimera Cam Chain Tensioner Button Upgrade.\u003c\/p\u003e\r\n\u003cp\u003e聽\u003c\/p\u003e\r\n\u003cp\u003eSits behind the flywheel so professional installation is recommended. Don't forget to also purchase the left-side crankcase gasket below.\u003c\/p\u003e\r\n\u003cp\u003e聽\u003c\/p\u003e\r\n\u003cp\u003eFITMENT:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2014-2020 Honda Grom 125\u003c\/li\u003e\r\n\u003cli\u003e2022-2023+ Honda Grom 125\u003c\/li\u003e\r\n\u003cli\u003e2018-2021 Honda Monkey 125\u003c\/li\u003e\r\n\u003cli\u003e2022-2023+ Honda Monkey 125\u003c\/li\u003e\r\n\u003cli\u003e2019-2021 Honda Super Cub 125\u003c\/li\u003e\r\n\u003cli\u003e2022-2023+ Honda Super Cub 125\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823541530683,"sku":"CH-1092","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_ntt_281_th.jpg?v=1667090578"},{"product_id":"chimera-front-foot-kick-rail","title":"Chimera Front Foot Kick Rail (Footrest Bar) NPS50 Ruckus CHF50 Metropolitan","description":"Chimera Front Foot Kick Rail for 2002 - Present NPS50 Honda Ruckus and 2002 - 2012 CHF50 Honda Metropolitan! A great and simple light weight accent pieces that will allow you to do multiple things with it! Add foot pegs to make it into a footrest bar, mount your GPS on there, attached a clamp on the cup holder, and much more!\u003cbr\u003e\u003cp\u003e\u003cspan\u003eChimera Front Foot Kick Rail for Honda Ruckus or Honda Metropolitan does come with pre-drilled and M8x1.25mm threaded holes so that you could install pegs onto it and turn it into a footrest bar! You could also mount accessories such as a GPS or phone holder on it. Powder-coated semi-gloss black, but feel free to paint it or powder coat it to match the color of your bike!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWill fit both 2002 - 2021 Honda Ruckus NPS50 and 2002 - 2012 Honda Metropolitan CHF50 (if you decide to keep the factory floorboard on your Honda Ruckus or Honda Metropolitan, then you will need very long screws to secure the brace (which is not included, see the installation overview below).\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eContent:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eChimera Kick Rail Footrest Bar\u003c\/li\u003e\n\u003cli\u003e2x M8 Mounting Bolts (secures to the Kick Rail to the chassis)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2002-present Honda Ruckus (NPS50) (would need additional hardware if mounting on top of OEM plastic floorboards)\u003c\/li\u003e\n\u003cli\u003e2002-2012 Honda Metropolitan (CHF50) 1st Gen (would need additional hardware if mounting on top of OEM plastic floorboards)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation Overview:\u003c\/p\u003e\u003cp\u003eOEM Floorboard Removed:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTo mount the Kick Rail, remove the two front 6mm nut clips under the gas tank.\u003c\/li\u003e\n\u003cli\u003eDrill\/ream out the frame holes to M8, which would allow the M8 mounting bolts to pass through.\u003c\/li\u003e\n\u003cli\u003ePair the Kick Rail Foot Rest with your favorite pegs and secure them with M8x1.25 bolts (NOT INCLUDED, peg and hardware vary on the peg set up.)\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eOn top of the OEM Floorboard:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eTo mount the Kick Rail with the OEM floorboard, remove the quick-nut clips under the gas tank.\u003c\/li\u003e\n\u003cli\u003eDrill\/ream out the floorboard base holes to M8, which would allow the M8 mounting bolts to pass through.\u003c\/li\u003e\n\u003cli\u003eADD aluminum spacers or a stack of washers on each of the mounting holes on top of the OEM floorboard till it's slightly above the floorboard. (NOT INCLUDED)\u003c\/li\u003e\n\u003cli\u003ePlace the X-Factor Footrest in position on top of the spacers. ADD the necessary M8 bolts and go from the bottom of the frame upward to secure the footrest onto the chassis. (NOT INCLUDED)\u003c\/li\u003e\n\u003cli\u003ePair the Kick Rail Foot Rest with your favorite pegs and secure them with M8x1.25 bolts (NOT INCLUDED, peg and hardware vary on the peg set up.)\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003ePegs are not included, please see related items for foot peg options. The peg shown in the reference photos is JSB Fabrication Derlin 3\" Slider Pegs. \u003c\/p\u003e\u003cp\u003eMade in the USA!\u003c\/p\u003e","brand":"Chimera Engineering","offers":[{"title":"Default Title","offer_id":40823546216507,"sku":"CH-1096","price":60.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0584\/4028\/6267\/products\/steadygarage_jts_31_th.jpg?v=1664295936"}],"url":"https:\/\/www.steadygarage.com\/collections\/chimera-engineering.oembed?page=18","provider":"Steady Garage","version":"1.0","type":"link"}